Apio Upload - FPGAwars/apio GitHub Wiki
Contents
Usage
apio upload [OPTIONS]
Description
Upload the bitstream to the FPGA. It builds the project if required
It also performs an automatic discovery and validation of the FTDI chip depending on the selected board.
Required package: oss-cad-suite
Options
| Flag | Long Flag | Description |
|---|---|---|
-b |
--board |
Select a specific board |
--serial-port |
Select a specific serial port. You can check the available serial devices with the command apio system --lsserial |
|
--ftdi-id |
Select a specific FTDI index. You can check the available FTDI indexes with the command apio system --lsftdi |
|
-s |
--sram |
Perform SRAM programming. Only available for iceprog compatible boards |
-f |
--flash |
Perform FLASH programming |
-p |
--project-dir |
Set the target directory for the project. |
-v |
--verbose |
Show the entire output of the command |
--verbose-yosys |
Show the yosys output of the command | |
--verbose-pnr |
Show the pnr output of the command | |
--top-module str |
Set the top level module (w/o .v ending) for build |
[!NOTE] All available boards, FPGAs, sizes, types and packs are showed in apio boards
Examples
1. Upload the ledon example
apio upload
