Flashing the firmware - ErikS-web/Wiki-test GitHub Wiki

Flashing firmware is possible with a separate program, but can now be done much more easily from your web browser.

Just goto the page with official released egzumer firmware releases.

  • First put the UV-K5 in programming mode (press PTT and turn on the UV-K5 and check that the white LED lights up).

  • Now connect the programming interface and a blue LED also lights up.

  • Select the latest/desired firmware and look for 🗲FLASH WITH A BROWSER🗲 and the build-in UV-mod-programming-page starts. Just wait a moment and the firmware is loaded, or select a different file from your PC.

flash firmware with browser

  • Press flash firmware and a screen pops-up.

If it is this screen, you are probably using Firefox. Use Chrome in stead of Firefox

Solution is to use Chrome. And than you can continue with ..

  • Select the Com-port where the programming-interface is connected.

Connect to serial port

  • Press Connect and programming starts (White LED starts flashing) and view the progress in the browser-screen

  • Just wait ... until

100

When finished, disconnect the programming interface and enjoy a new release version ;-)