How to MOD MicroWorks 60V to 12V stepdown converter - EGG-electric-unicycle/documentation GitHub Wiki

This board is very useful because have as input 60V from the EUCs battery packs and can output 12V and max 2A (or other configurable voltage). I were able to configure the board to output 5V instead of the 12V. This way I could power a RGB LED strip and Arduino with the 5V.

The original board have a resistor of 2.4k (R5 on the board) and I exchanged for another of 6.8k (as seen on the picture) - the output voltage will be 4.9 volts. Other voltages are possible if you use other resistor values.

Link to product page on MicroWorks shop: http://wholesaler.alibaba.com/product-detail/converter-DC-60V-to-12V-output_60461417441.html