| 01. |
1.Aluminium flashing 2.Fishing pole 3.Tool box 4.Wooden cardboard |
1. 2 servo 2.Ardrino Uno 3.usb cable 4.keyboard |
Working: 1.Servo:used for the movement of the finger and for slider. 2.Wooden cardboard::on which will be mounted a finger servo. 3.Aluminium flashing:holding finger servo. 4.Ardino uno:takes the input reading and turn into a output- operating motor. 5.Fishing pole:used as sliding rails |
https://www.youtube.com/watch?v=vFC7ya5Q5n4 |
| 02. |
1.Aluminium rods 2.Solonoids 3.screws 4.Control box |
1.Ardrino mega 2500 2.USB cable 3..keyboard 4.Jumper wire |
Working: 1.Aluminium rods:rods on which solenoids will be mounted2.Solonoids:for pressing the key and playing the tune 3.Ardino mega 2500: takes input musical codes and gives the out put tones. 4.Control box: used for housing arduino mega 2500 with its ends open for wires. 5.jumper wire: for wiring purposes. |
https://www.youtube.com/watch?v=-6KD3dyWLP8 |
| 03. |
1.Cardboard 2.Wheels 3.Glue gun 4.Toolbox |
1.100 RPM DC motor 2.Remote 3.Keyboard 4.Battery 5.Switch |
Working:1.Cardboard: For the outer design of robot that will hold the other parts. 2.12 V Battery: to supply power into the machine. 3.Remote: A remote of a spare old toy car to control the motion and functions of the musical bot. 4.Wheels: for the motion of machine. 5.Speakers: to get fruitful sound. 6.Switch: to control flow of electric current. 7.DC Motor: carries the motion of wheels. |
https://www.youtube.com/watch?v=VZvbZ5HZEQU |
| 04. |
1.Metal Plates 2.Pens/Pencils 3.Glue gun 4.Toolbox |
1.100 RPM DC motor 2.Remote 3.Transistors 4.Battery 5.Switch |
Working:1.Metal Plates: For the outer design of robot that will hold the other parts. 2.12 V Battery: to supply power into the machine. 3.Speakers: to get fruitful sound 4.Switch: to control flow of electric current. 5.DC Motor: carries the motion of wheels. |
https://www.youtube.com/watch?v=1S_DaIr-foM |
