LAB 7.1 VLSM - Dleifnesor/NET-150 GitHub Wiki

commands used: version 2, reboot

In this lab i used subnetting to divide the number of required hosts in a network and using these subnets i distributed the IP ranges by department.

using the PDU table I confirmed connectivity to each of the connected PCs, there were a lot of errors at first and i found my issue to be the IPs were not properly matching the IP ranges I made in the table, this was fixed by meticulously going through each endpoint and double checking to make sure the IP was correct, i also had to configure RIP again and save it to NVRAM.