Connecting AI FPGA Module to PC - DigitalMediaProfessionals/dv-sdk GitHub Wiki

Connecting AI FPGA module to Windows-PC

Here, one method to connect FPGA to Windows-based PC is described. Connection with other platforms are possible; the introduced method is only one of the simplest.

  1. Download and install Tera Term
  2. Using a USB cable, connect the AI FPGA module to the PC. (One may needs to install USB to UART bridge driver. Please download and install a driver from here.)
  3. Switch on the AI FPGA module, open Tera Term and open a new connection (File -> New Connection...) following the setting: Opening new connection with Tera Term
  4. Then setup the serial port (Setup -> Serial Port...) configuration as the following setting: Serial port setting