Tutorial - Deans-Acc/Draconic-Evolution-Reactor-Simulator GitHub Wiki
For everyone that doesn't know how to use the simulator.
- Step 1: Input the amount of you fuel you want to simulate the reactor with.
- Step 2: Input the amount of rf you want to pull from the reactor every tick from the beginning.
- Step 3: Input the amount of rf you want to insert into the reactor every tick.
- Step 4: Wait for the simulation to end or change values when the shield stabilisied.
Now we will look at each value: Temperatur = How hot the reactor is, higher = more energy generation. For best results keept at 8000.
Shield = The thing that stopps everything from going boom! The higher, the better. Percent relative to max capacity.
fieldInputrate = How much rf is currently needed to keep the shield at it's current level.
DrainFactor = Multiplier to fuelUseRate, only changes above 8000 degrees temperature.
fieldDrain = How much shield the shield lowers every tick, even positiv when shield goes up.
Saturation = Complicated, goes down when output goes up.
Generation Rate = How much rf the reactor can currently produce.
Fuel = How much of your Awakend Draconium is still in the reactor. Percent relative to Fuel at the beginning.
fuelUseRate = How much Fuel is used per tick. Higher output, higher fuelUseRate.
Energy Loss / Win = How much energy you have at this point lost or won considering input and output.
With the reactor the one thing you don't want to happen, is that the shield drops to zero! So don't extract to much energy at once from the reactor!
For more details and safety mechanisms: