USER MANUAL: (V1.1.0 - 21.03.2021)

Recommended Bot Commands (set in botfather for your bot):

reset - renew messages

debug - open debug information

remove - remove printer from Bot

stats - server statistics

User Interactions:

Printer Menu:

* ExtCommands (menu point only shown if you have configured a webcam in your repetier server)

       send any of your extCommands to your server

* Webcam x (menu point only shown if you have configured a webcam in your repetier server)

       get video, Gif or picture from the webcam

* Quick Commands (menu point only shown if you have configured a webcam in your repetier server)

       send any of your quick commands to your server/printer

* Printer (menu point only shown if you have the printer switched on)

       Printer in Standby:
              Printer Queue: List of sliced printer files to select and start printing
              Fan: Start and stop your fans (parameter via buttons and in typed form)
              Extruder: Temperature setting of your extruder (parameter via buttons and in typed form)
              Heatbed: Temperature setting of your heatbed (parameter via buttons and in typed form)
              Chamber: Temperature setting of your chamber (parameter via buttons and in typed form)

       Printer printing:
              Flow multiplier: Flow setting of your print (parameter via buttons and in typed form)
              Speed multiplier: Speed setting of your print (parameter via buttons and in typed form)
              Fan: Start and stop your fans (parameter via buttons and in typed form)
              Extruder: Temperature setting of your extruder (parameter via buttons and in typed form)
              Heatbed: Temperature setting of your heatbed (parameter via buttons and in typed form)
              Chamber: Temperature setting of your chamber (parameter via buttons and in typed form)
              Cancel: Cancel your actual print

* Settings

       1. - "Extruder":
         
              Extruder Temperature: Temperature for the bot to detect Extruder is cold.
              Extruder extCommand: After print and if temperature below limit -> trigger configured extCommand

       2. - "Heatbed":
         
              Heatbed Temperature: Temperature for the bot to detect Heatbed is cold.
              Heatbed extCommand: After print and if temperature below limit -> trigger configured extCommand

       3. - "Pic after print":
         
              Time: Delay time to get a picture after finishing a print.
              Webcam selection: Select which webcam which should send the picture

       4. - "Pic after z height":
         
              z height: z height to get a picture during a print.
              Webcam selection: Select which webcam which should send the picture

       5. - "Pic after time":
         
              Time: Delay time to get a picture during a print.
              Webcam selection: Select which webcam which should send the picture

Notification Menu:

click on notification number to delete message from repetier server

Special functions "/debug":

write inside your bot telegram conversation - /debug - to enter the debug tool. Here you get all available logs listed. With your choice you´ll get all requiered information send to your bot to send it to the developer.

Special functions "/remove":

selected printers will be removed from your bot.

Special functions "/stats":

stats of your bot. You´ll see printer stats and costs for your printers.