Module Support - CzendaZdenda/qgis GitHub Wiki

    This is a programatically generated list of modules that should be supported.
    Not all of these modules have been tested and some may only work under some
    circumstances.

###Status Supported modules: 170 (40%)

Non supported modules: 255

Total registered modules: 425

Tested Modules

##Supported modules

  • 01: My first module (saga, lectures, introducing module programming)
  • 02: Pixel by pixel operations with two grids (saga, lectures, introducing module programming)
  • 03: Direct neighbours (saga, lectures, analysis, introducing module programming)
  • 03: Spatially Distributed Simulation of Soil Nitrogen Dynamics (saga, ecology, modelling the human impact on nature, simulation)
  • 04: Direct neighbours - more... (saga, lectures, analysis, introducing module programming)
  • 05: Direct neighbours - slope and aspect (saga, lectures, analysis, introducing module programming)
  • 06: Extended neighbourhoods (saga, lectures, introducing module programming)
  • 07: Extended neighbourhoods - catchment areas (trace flow) (saga, lectures, introducing module programming)
  • 08: Extended neighbourhoods - catchment areas (parallel) (saga, lectures, introducing module programming)
  • 09: Extended neighbourhoods - catchment areas (recursive) (saga, lectures, introducing module programming)
  • 10: Dynamic Simulation - Life (saga, lectures, introducing module programming, simulation)
  • 11: Dynamic Simulation - Soil Nitrogen Dynamics (saga, lectures, introducing module programming, simulation)
  • 12: First steps with shapes (saga, lectures, introducing module programming)
  • 14: Vectorising channel lines (saga, lectures, introducing module programming)
  • Accumulated Cost (Anisotropic) (saga, grid, analysis)
  • Accumulated Cost (Isotropic) (saga, grid, analysis)
  • Add Coordinates to points (saga, shapes, points)
  • Aggregate (saga, raster, grid, tools)
  • Analytical Hillshading (saga, lighting, terrain analysis)
  • Average With Mask 1 (saga, a. perego, contributions)
  • Average With Mask 2 (saga, a. perego, contributions)
  • Average With Thereshold 1 (saga, a. perego, contributions)
  • Average With Thereshold 2 (saga, a. perego, contributions)
  • Average With Thereshold 3 (saga, a. perego, contributions)
  • Burn Stream Network into DEM (saga, preprocessing, terrain analysis)
  • Catchment Area (Flow Tracing) (saga, hydrology, terrain analysis)
  • Catchment Area (Parallel) (saga, hydrology, terrain analysis)
  • Catchment Area (Recursive) (saga, hydrology, terrain analysis)
  • Cell Balance (saga, hydrology, terrain analysis)
  • Change Vector Analysis (saga, vector, grid, analysis)
  • Channel Network (saga, channels, terrain analysis)
  • Close Gaps with Spline (saga, tools, grid)
  • Close Gaps (saga, tools, grid)
  • Close One Cell Gaps (saga, tools, grid)
  • Contour Lines from Grid (saga, shapes, grid)
  • Convergence Index (saga, morphometry, terrain analysis)
  • Convert Data Storage Type (saga, tools, grid)
  • Convert Lines to Points (saga, shapes, points)
  • Convert Lines to Polygons (saga, shapes, polygons)
  • Convert Polygon/Line Vertices to Points (saga, shapes, polygons)
  • Convert Polygons to Lines (saga, shapes, lines)
  • Convex Hull (saga, shapes, points)
  • Coordinate Transformation (Shapes) (saga, projection)
  • Copy Selection to New Shapes Layer (saga, shapes, tools)
  • Count Points in Polygons (saga, shapes, points)
  • Create Constant Grid (saga, tools, grid)
  • Create Point Grid (saga, shapes, points)
  • Create graticule (saga, shapes, tools)
  • Cross Profiles (saga, profiles, terrain analysis)
  • Curvature Classification (saga, morphometry, classification, terrain analysis)
  • D8 Flow Analysis (saga, channels, analysis, terrain analysis)
  • DTM Filter (slope-based) (filter, saga, grid)
  • Delete Selection from Shapes Layer (saga, shapes, tools)
  • Destriping 1 (filter, saga, a. perego, contributions)
  • Destriping 2 (filter, saga, a. perego, contributions)
  • Directional Average 1 (saga, a. perego, contributions)
  • Diurnal Anisotropic Heating (saga, morphometry, terrain analysis)
  • Downslope Distance Gradient (saga, morphometry, terrain analysis)
  • Edge Contamination (saga, hydrology, terrain analysis)
  • Effective Air Flow Heights (saga, morphometry, terrain analysis)
  • Export ESRI Arc/Info Grid (saga, grid, export, file)
  • Export GStat Shapes (saga, shapes, export, file)
  • Export Surfer Grid (saga, grid, export, file)
  • Export True Color Bitmap (saga, grid, export, file)
  • Fast Representativeness (saga, geostatistics, grids)
  • Fill Sinks (Planchon/Darboux, 2001) (saga, preprocessing, terrain analysis)
  • Fill Sinks (Wang & Liu) (saga, preprocessing, analysis, terrain analysis)
  • Fill Sinks XXL (Wang & Liu) (saga, preprocessing, analysis, terrain analysis)
  • Filter Clumps (filter, saga, grid)
  • Fire Risk Analysis (saga, fire spreading, analysis, simulation)
  • Fit Color Palette to Grid Values (saga, grid, visualisation)
  • Fit N Points to shape (saga, shapes, points)
  • Flat Detection (saga, preprocessing, terrain analysis)
  • Flow Path Length (saga, hydrology, terrain analysis)
  • Flow Width and Specific Catchment Area (saga, hydrology, terrain analysis)
  • Fragmentation Classes from Density and Connectivity (saga, grid, analysis)
  • Function (saga, calculus, grid)
  • GPSBabel (saga, gps import, file)
  • GPX to shapefile (saga, gps import, file)
  • Gaussian Filter (filter, saga, grid)
  • Geometrical Properties of Polygons (saga, shapes, polygons)
  • Get Shapes Extents (saga, shapes, tools)
  • Gradient Vector from Cartesian to Polar Coordinates (saga, calculus, vector, grid)
  • Gradient Vector from Polar to Cartesian Coordinates (saga, calculus, vector, grid)
  • Gradient Vectors from Direction and Length (saga, shapes, grid)
  • Gradient Vectors from Directional Components (saga, shapes, grid)
  • Gradient Vectors from Surface (saga, shapes, grid)
  • Grid Buffer (saga, tools, grid)
  • Grid Difference (saga, calculus, grid)
  • Grid Masking (saga, tools, grid)
  • Grid Normalisation (saga, calculus, grid)
  • Grid Orientation (saga, tools, grid)
  • Grid Proximity Buffer (saga, tools, grid)
  • Grid Skeletonization (saga, segmentation, imagery)
  • Grid Standardisation (saga, calculus, grid)
  • Grid System Extent (saga, shapes, grid)
  • Grid Values to Points (randomly) (saga, shapes, grid)
  • Grid Volume (saga, calculus, grid)
  • Import Atlas Boundary File (saga, import, shapes, file)
  • Import GStat Shapes (saga, import, shapes, file)
  • Import Shapes from XYZ (saga, import, shapes, file)
  • Import WASP terrain map file (saga, import, shapes, file)
  • Invert Data/No-Data (saga, tools, grid)
  • Invert Selection of Shapes Layer (saga, shapes, tools)
  • Lake Flood (saga, hydrology, terrain analysis)
  • Land Surface Temperature (saga, morphometry, terrain analysis)
  • Line Properties (saga, shapes, lines)
  • Line Simplification (saga, shapes, lines)
  • Line-Polygon Intersection (saga, shapes, lines)
  • Local Minima and Maxima (saga, shapes, vector, grid)
  • Majority Filter (filter, saga, grid)
  • Mass Balance Index (saga, morphometry, classification, terrain analysis)
  • Metric Conversions (saga, calculus, grid)
  • Morphological Filter (filter, saga, grid)
  • Morphometric Protection Index (saga, morphometry, terrain analysis)
  • Multi Direction Lee Filter (filter, saga, grid, analysis)
  • Multiresolution Index of Valley Bottom Flatness (MRVBF) (saga, morphometry, terrain analysis)
  • ODBC Commit/Rollback Transaction (saga, database (odbc))
  • ODBC Connect (saga, database (odbc))
  • ODBC Disconnect (saga, database (odbc))
  • ODBC Execute SQL (saga, database (odbc))
  • OGR: Export Vector Data (saga, vector, export, gdal/ogr, file)
  • Overland Flow Distance to Channel Network (saga, channels, terrain analysis)
  • Patching (saga, tools, grid)
  • Pattern Analysis (saga, grid, analysis)
  • Point Statistics for Polygons (saga, shapes, statistics, polygons)
  • Points Export (saga, database (odbc), export, database)
  • Points Import (saga, import, database (odbc), database)
  • Polygon Centroids (saga, shapes, polygons)
  • Polygon Shape Indices (saga, shapes, polygons)
  • Polygon-Line Intersection (saga, shapes, polygons)
  • Polygons to Edges and Nodes (saga, shapes, polygons)
  • PostGIS Shapes Import (saga, import, database (odbc), database)
  • Proximity Grid (saga, tools, grid)
  • Pythagoras' Tree (saga, recreations, fractals)
  • RGB Composite (saga, grid, visualisation)
  • Radius of Variance (Grid) (saga, geostatistics, grids)
  • Rank Filter (filter, saga, grid)
  • Real Area Calculation (saga, morphometry, terrain analysis)
  • Relative Heights and Slope Positions (saga, morphometry, terrain analysis)
  • Representativeness (Grid) (saga, geostatistics, grids)
  • SAGA Wetness Index (saga, hydrology, classification, analysis, terrain analysis)
  • Select by Location... (saga, shapes, tools)
  • Simple Filter (filter, saga, grid)
  • Simulation (saga, fire spreading, simulation)
  • Sink Drainage Route Detection (saga, preprocessing, terrain analysis)
  • Sink Removal (saga, preprocessing, terrain analysis)
  • Sky View Factor (saga, lighting, terrain analysis)
  • Slope Length (saga, hydrology, terrain analysis)
  • Slope, Aspect, Curvature (saga, morphometry, terrain analysis)
  • Soil Texture Classification (saga, grid, analysis, classification)
  • Sort Grid (saga, tools, grid)
  • Spatial Point Pattern Analysis (saga, geostatistics, analysis, points)
  • Split Shapes Layer Randomly (saga, shapes, tools)
  • Strahler Order (saga, channels, terrain analysis)
  • Stream Power Index (saga, hydrology, terrain analysis)
  • Surface Specific Points (saga, morphometry, terrain analysis)
  • Table Deletion (saga, database (odbc), database)
  • Table calculator for shapes (saga, calculus, table)
  • Threshold Buffer (saga, tools, grid)
  • Topographic Wetness Index (TWI) (saga, hydrology, terrain analysis)
  • Upslope Area (saga, hydrology, terrain analysis)
  • Vectorising Grid Classes (saga, shapes, grid)
  • Vegetation Index[distance based] (saga, imagery, tools)
  • Vegetation Index[slope based] (saga, imagery, tools)
  • Vertical Distance to Channel Network (saga, channels, terrain analysis)
  • Water Retention Capacity (saga, hydrology, simulation)
  • Watershed Basins (Extended) (saga, channels, analysis, terrain analysis)
  • Watershed Basins (saga, channels, terrain analysis)
  • Wind Effect (Windward / Leeward Index) (saga, morphometry, terrain analysis)

##Unsupported modules

  • 01: A Simple Litter System is missing support for parameter Results.
  • 02: Carbon Cycle Simulation for Terrestrial Biomes is missing support for parameters Results, Transfer Coefficients & Partition Coefficients.
  • 13: Reprojecting a shapes layer is missing support for parameters Translation, Scale factors & Shear factors.
  • 3D Shapes Viewer is missing support for parameter Color.
  • Add Grid Values to Points is missing support for parameter Grids.
  • Add Grid Values to Shapes is missing support for parameter Grids.
  • Add Polygon Attributes to Points is missing support for parameter Attribute.
  • Aggregation Index is missing support for parameter Result.
  • Analytical Hierarchy Process is missing support for parameters Input Grids & Pairwise Comparisons Table .
  • B-Spline Approximation is missing support for parameters Attribute & Grid.
  • BSL from File is missing support for parameter Output.
  • BSL is missing support for parameter Output.
  • Bifurcation is missing support for parameter Output.
  • Change Cell Values is interactive.
  • Change Detection is missing support for parameters Look-up Table, Value (Maximum), Name, Look-up Table, Value, Name, Changes, Value (Maximum) & Value.
  • Change Grid Values - Flood Fill is interactive.
  • Change Grid Values is missing support for parameter Lookup Table.
  • Clip Grid with Polygon is missing support for parameters Output & Input.
  • Clip Points with Polygons is missing support for parameters Clipped Points & Add Attribute to Clipped Points.
  • Cluster Analysis for Grids is missing support for parameters Statistics & Grids.
  • Cluster Analysis for Point Clouds is missing support for parameters Point Cloud, Result & Statistics.
  • Cluster Analysis is missing support for parameters Table, Statistics & Attributes.
  • Color Blending is missing support for parameter Grids.
  • Color Palette Rotation is missing support for parameter Colors.
  • Color Triangle Composite is missing support for parameters Color, Color & Color.
  • Combine Grids is missing support for parameter LookUp Table.
  • Convergence Index (Search Radius) is missing support for parameter Weighting.
  • Convert Points to Line(s) is missing support for parameters Order by... & Separate by....
  • Convert Table to Points is missing support for parameters Table, Y & X.
  • Conway's Life is missing support for parameter Grid.
  • Coordinate Transformation (Grid List) is missing support for parameters Y Coordinates, Source, Target & X Coordinates.
  • Coordinate Transformation (Grid) is missing support for parameters X Coordinates, Y Coordinates & Grid.
  • Coordinate Transformation (Shapes List) is missing support for parameters Source & Target.
  • Covered Distance is missing support for parameter Grids.
  • Create 3D Image is missing support for parameters Shapes to project & Background Color.
  • Create Chart Layer (bars/sectors) is missing support for parameter Size field.
  • Create Empty Table is missing support for parameter Table.
  • Create Grid System is missing support for parameters Shape(s), Grid(s) & Dummy Grid.
  • Create New Shapes Layer is missing support for parameters Shapes & Attributes.
  • Create Reference Points is interactive.
  • Create Web Content is interactive and missing support for parameter Name Field.
  • Crop to Data is missing support for parameter Input Grids.
  • Cross-Classification and Tabulation is missing support for parameter Cross-Tabulation Table.
  • Cubic Spline Approximation is missing support for parameters Grid & Attribute.
  • Cut Shapes Layer is interactive.
  • Cut Shapes Layer is missing support for parameters Shapes & Cut.
  • Cutting is interactive and missing support for parameters Additional Cuts, Cut & Additional Grids.
  • Directional Statistics for Single Grid is missing support for parameter Weighting.
  • Distance Matrix is missing support for parameter Distance Matrix Table.
  • Downslope Area is interactive.
  • Drop Point Cloud Attribute is missing support for parameters Input, Attribute to drop & Output.
  • Enumerate a Table is missing support for parameters Input, Attribute & Output.
  • Export Atlas Boundary File is missing support for parameters Primary Name & Secondary Name.
  • Export GPX is missing support for parameters Elevation, Comment, Name & Description.
  • Export Grid to XYZ is missing support for parameter Grids.
  • Export Image (bmp, jpg, pcx, png, tif) is missing support for parameter Lookup Table.
  • Export Scalable Vector Graphics (SVG) File is missing support for parameter Shapes.
  • Export Shapes to Generate is missing support for parameter Attribute.
  • Export Shapes to XYZ is missing support for parameter Attribute.
  • Export Surfer Blanking File is missing support for parameters Description, z values & Name.
  • Export TIN to Stereo Lithography File (STL) is missing support for parameters TIN & Z Attribute.
  • Export Text Table is missing support for parameter Table.
  • Export WASP terrain map file is missing support for parameter Map File.
  • Fast Region Growing Algorithm is missing support for parameter Input Grids.
  • Flow Accumulation (Parallel) is missing support for parameters TIN, Z Values & Flow Accumulation.
  • Flow Accumulation (Trace) is missing support for parameters TIN, Z Values & Flow Accumulation.
  • Flow Accumulation, Mass-Flux Method is missing support for parameters Create Output of Quarter Cell Grids, Slope, Aspect, Flow Accumulation & Flow Lines.
  • Flow Depth is interactive.
  • Flow Path Profile is interactive and missing support for parameter Values.
  • Flow Sinuosity is interactive.
  • Fractal Dimension of Grid Surface is missing support for parameter Result.
  • Fragmentation (Alternative) is missing support for parameter Summary.
  • Fragmentation (Standard) is missing support for parameter Summary.
  • Function Fit is missing support for parameters x - Values, Source & y - Values.
  • Fuzzify is missing support for parameter Control Points.
  • Fuzzy Intersection (AND) is missing support for parameter Grids.
  • Fuzzy Union (OR) is missing support for parameter Grids.
  • GDAL: Export Raster to GeoTIFF is missing support for parameter Grid(s).
  • GDAL: Export Raster is missing support for parameter Grid(s).
  • GDAL: Import Raster is missing support for parameter Grids.
  • Gaussian Landscapes is missing support for parameter Grid.
  • Geographically Weighted Multiple Regression (Points/Grids) is missing support for parameters Regression Parameters, Predictors, Dependent Variable & Weighting.
  • Geographically Weighted Multiple Regression is missing support for parameters Intercept, Predictors, Weighting, Quality & Dependent Variable.
  • Geographically Weighted Regression (Points/Grid) is missing support for parameters Weighting & Dependent Variable.
  • Geographically Weighted Regression is missing support for parameters Quality, Predictor, Intercept, Weighting, Slope, Grid & Dependent Variable.
  • Geometric Figures is missing support for parameter Result.
  • Georeferencing - Grids is missing support for parameters Grid, x Position, y Position & Shapes.
  • Georeferencing - Move Grid is interactive and missing support for parameter Grid.
  • Georeferencing - Shapes is missing support for parameters x Position & y Position.
  • Global Moran's I for Grids is missing support for parameter Result.
  • Gradient is missing support for parameters TIN & Z Values.
  • Grid Calculator is missing support for parameter Grids.
  • Grid Statistics for Polygons is missing support for parameter Grids.
  • Grid Value Request is interactive and missing support for parameters Grids to request & Values.
  • Grid Values to Shapes is missing support for parameter Grids.
  • Grid to TIN (Surface Specific Points) is missing support for parameters Values, Thresholds & TIN.
  • Grid to TIN is missing support for parameters Values & TIN.
  • Grids Product is missing support for parameter Grids.
  • Grids Sum is missing support for parameter Grids.
  • Grids from classified grid and table is missing support for parameters Table, Attribute & Grids.
  • Histogram Surface is missing support for parameter Histogram.
  • Hypsometry is missing support for parameter Hypsometry.
  • IHACRES Basin is missing support for parameters Table, IHACRES Version & Storage Configuration.
  • IHACRES Calibration (2) is missing support for parameters Table, Streamflow Column, Table, Temperature Column, Table, Date Column, Precipitation Column, Storage Configuration, Subbasin Inflow, IHACRES Version & Table.
  • IHACRES Elevation Bands Calibration is missing support for parameters IHACRES Version, Table, Table, Nash-Sutcliffe Efficiency & Storage Configuration.
  • IHACRES Elevation Bands is missing support for parameters Table, Storage Configuration & IHACRES Version.
  • IHACRES Version 1.0 is missing support for parameters Streamflow Column, Temperature Column, Table, Table, Table, Date Column, Precipitation Column, Storage Configuration, Table, IHACRES Version & Non-Linear Module.
  • Import Binary Raw Data is missing support for parameter Grid.
  • Import DXF Files is missing support for parameters Shapes & Tables.
  • Import ESRI Arc/Info Grid is missing support for parameters Grid & ASCII Grid Options.
  • Import ESRI E00 File is missing support for parameters Grids, Tables, Table & Shapes.
  • Import Erdas LAN/GIS is missing support for parameter Grids.
  • Import GPX is missing support for parameter GPX Import.
  • Import GRIB2 record is missing support for parameter Grid.
  • Import Grid from Table is missing support for parameter Grid.
  • Import Grid from XYZ is missing support for parameters Grid & Count.
  • Import Image (bmp, jpg, png, tif, gif, pnm, xpm) is missing support for parameters Image, Image (Red Channel), Image (Green Channel) & Image (Blue Channel).
  • Import MOLA Grid (MEGDR) is missing support for parameter Grid.
  • Import Point Cloud from File is missing support for parameter Point Cloud.
  • Import Point Cloud from Text File is missing support for parameter Point Cloud.
  • Import SRTM30 DEM is missing support for parameter Grid.
  • Import Stereo Lithography File (STL) is missing support for parameters Rotation, Point Cloud, Shapes & Grid.
  • Import Surfer Blanking Files is missing support for parameter Look up table (Points).
  • Import Surfer Grid is missing support for parameter Grid.
  • Import Text Table (Fixed Column Sizes) is missing support for parameter Table.
  • Import Text Table with Numbers only is missing support for parameter Table.
  • Import Text Table is missing support for parameter Table.
  • Import USGS SRTM Grid is missing support for parameter Grids.
  • Inverse Distance Weighted is missing support for parameters Attribute & Grid.
  • Isochrones Constant Speed is interactive.
  • Isochrones Variable Speed is interactive.
  • Join a Table is missing support for parameters Table, Identifier & Identifier.
  • Kernel Density Estimation is missing support for parameters Population & Grid.
  • LS Factor is missing support for parameter Desmet & Govers.
  • Lake Flood is interactive.
  • Laplacian Filter is missing support for parameter User Defined Kernel.
  • Layer of extreme value is missing support for parameter Grids.
  • Least Cost Path is interactive and missing support for parameter Values.
  • Least Cost Paths is missing support for parameters Values, Profile (points) & Profile (lines).
  • Line Dissolve is missing support for parameters 2. Attribute, 3. Attribute & 1. Attribute.
  • Mandelbrot Set is interactive and missing support for parameter Grid.
  • Merge Shapes Layers is missing support for parameter Additional Layers.
  • Merging is missing support for parameters Grids to Merge & Merged Grid.
  • Mine Sweeper is interactive and missing support for parameter Grid.
  • Minimum Distance Analysis is missing support for parameter Minimum Distance Analysis.
  • Modifed Quadratic Shepard is missing support for parameters Attribute & Grid.
  • Multi-Band Variation is missing support for parameters Grids & Weighting.
  • Multilevel B-Spline Interpolation (from Grid) is missing support for parameter Grid.
  • Multilevel B-Spline Interpolation is missing support for parameters Attribute & Grid.
  • Multiple Regression Analysis (Points/Grids) is missing support for parameters Grids, Attribute & Details.
  • Natural Neighbour is missing support for parameters Grid & Attribute.
  • Nearest Neighbour is missing support for parameters Attribute & Grid.
  • Newton-Raphson is interactive and missing support for parameters Result & Shade.
  • OGR: Import Vector Data is missing support for parameter Shapes.
  • Ordered Weighted Averaging (OWA) is missing support for parameters Input Grids & Weights.
  • Ordinary Kriging (Global) is missing support for parameters Grid, Attribute, Additional Parameters & Variance.
  • Ordinary Kriging (VF) is missing support for parameters Attribute, Quality Measure, Grid & Variogram.
  • Ordinary Kriging (VF, Global) is missing support for parameters Quality Measure, Variogram, Grid & Attribute.
  • Ordinary Kriging is missing support for parameters Variance, Attribute, Additional Parameters & Grid.
  • Overland Flow - Kinematic Wave D8 is missing support for parameters Flow at Gauges & Newton-Raphson.
  • Point Cloud Attribute Calculator is missing support for parameters Point Cloud & Result.
  • Point Cloud Cutter is interactive and missing support for parameters Points & Cut.
  • Point Cloud Cutter is missing support for parameters Points & Cut.
  • Point Cloud Reclassifier / Subset Extractor is missing support for parameters maximum value, Point Cloud, Attribute, Method user supplied table, Special cases, new value, Method range, Method single, minimum value, Lookup Table, Lookup Table, Method simple table & Result.
  • Point Cloud Thinning (simple) is missing support for parameters Input & Result.
  • Point Cloud Viewer is missing support for parameter Points.
  • Point Cloud from Grid Points is missing support for parameters Additional Values & Points.
  • Point Cloud from Shapes is missing support for parameters Z Value & Points.
  • Point Cloud to Grid is missing support for parameters Z Value, Attributes, Number of Points in Cell & Points.
  • Point Cloud to Shapes is missing support for parameter Points.
  • Points Filter is missing support for parameter Attribute.
  • Points Thinning is missing support for parameter Attribute.
  • Polygon Dissolve is missing support for parameters 3. Attribute, 1. Attribute & 2. Attribute.
  • Polygon Intersection is missing support for parameters Attribute A & Attribute B.
  • Polynomial Regression is missing support for parameters Attribute, User Defined Polynomial & Grid.
  • Polynomial Trend from Grids is missing support for parameters Polynomial Coefficients, Dependent Variables, Independent Variable (per Grid and Cell) & Independent Variable (per Grid).
  • PostGIS Shapes Export is missing support for parameter Constraints.
  • Potential Incoming Solar Radiation is missing support for parameters Time, Day of Year (End of Range), Height of Atmosphere and Vapour Pressure, Atmospheric Effects, Lumped Atmospheric Transmittance, Day of Year, Air Pressure, Water and Dust Content, Location & Planetary Bending.
  • Principle Components Analysis is missing support for parameters Grids & Principle Components.
  • Principle Components Analysis is missing support for parameters Table, Attributes & Principle Components.
  • Profile from points is missing support for parameters Input, X, Y & Result.
  • Profile is interactive and missing support for parameter Values.
  • Profiles from Lines is missing support for parameters Values, Name & Profiles.
  • Proj.4 (Command Line Arguments, Grid) is missing support for parameters Grid, X Coordinates, General Settings, Shapes, Target Parameters, Source Parameters & Y Coordinates.
  • Proj.4 (Command Line Arguments, List of Grids) is missing support for parameters General Settings, Source Parameters, Target, Source, X Coordinates, Y Coordinates, Target Parameters & Shapes.
  • Proj.4 (Command Line Arguments, List of Shapes Layers) is missing support for parameters Target Parameters, Source, Target, Source Parameters & General Settings.
  • Proj.4 (Command Line Arguments, Shapes) is missing support for parameters Target Parameters, General Settings & Source Parameters.
  • Proj.4 (Dialog, Grid) is missing support for parameters Target Parameters, General Settings, Shapes, Y Coordinates, Source Projection Parameters, Source Parameters, Target Projection Parameters, Grid & X Coordinates.
  • Proj.4 (Dialog, List of Grids) is missing support for parameters Source Parameters, Target Projection Parameters, Target, Shapes, Source, Target Parameters, Y Coordinates, General Settings, X Coordinates & Source Projection Parameters.
  • Proj.4 (Dialog, List of Shapes Layers) is missing support for parameters General Settings, Target Projection Parameters, Source, Target Parameters, Target, Source Projection Parameters & Source Parameters.
  • Proj.4 (Dialog, Shapes) is missing support for parameters Source Parameters, Target Parameters, General Settings, Target Projection Parameters & Source Projection Parameters.
  • QuadTree Structure to Shapes is missing support for parameter Attribute.
  • Random Field is missing support for parameters Uniform, Random Field, Grid Properties & Gaussian.
  • Random Terrain Generation is missing support for parameter Grid.
  • Reclassify Grid Values is missing support for parameters minimum value, Special cases, Lookup Table, Method user supplied table, maximum value, Lookup Table, Method single, Method simple table, new value & Method range.
  • Regression Analysis (Points/Grid) is missing support for parameter Attribute.
  • Remove Duplicate Points is missing support for parameter Attribute.
  • Resampling is missing support for parameter Grid.
  • Residual Analysis (Grid) is missing support for parameter Weighting.
  • Rotate Table is missing support for parameters Input & Output.
  • Running Average is missing support for parameters Input, Attribute & Output.
  • SVG Interactive Map is missing support for parameter Shapes Layers.
  • Seed Generation is missing support for parameter Features.
  • Select Points is interactive.
  • Select by Attributes... (Numerical Expression) is missing support for parameter Attribute.
  • Select by Attributes... (String Expression) is missing support for parameter Attribute.
  • Separate points by direction is missing support for parameter Ouput.
  • Set Coordinate Reference System is missing support for parameters Shapes, Grids & TINs.
  • Shapes Buffer is missing support for parameter Buffer Distance (Attribute).
  • Shapes to Grid is missing support for parameters Attribute, Number of Values & Grid.
  • Shapes to TIN is missing support for parameter TIN.
  • Simple Region Growing is missing support for parameters Features, Seeds & Feature Space Options.
  • Soil Moisture Content is missing support for parameters Climate Data & Crop Coefficients.
  • Split Shapes Layer Completely is missing support for parameters Attribute & Output.
  • Split Shapes Layer is missing support for parameter Tiles.
  • Split Table/Shapes by Attribute is missing support for parameters Table / Shapes, Attribute & Cuts.
  • Statistics for Grids is missing support for parameter Grids.
  • Sudoku is interactive and missing support for parameters Grid & Board.
  • Supervised Classification is missing support for parameters Class Information, Class Identifier & Grids.
  • Swath Profile is interactive and missing support for parameter Values.
  • TIN Viewer is missing support for parameters TIN, Elevation & Color.
  • TIN to Shapes is missing support for parameter TIN.
  • TOPMODEL is missing support for parameters Climate Data (P, EP) & Simulation Output.
  • Table Export is missing support for parameters Table & Constraints.
  • Table Field Description is missing support for parameter Field Description.
  • Table Import is missing support for parameter Table.
  • Table calculator is missing support for parameters Table & Result.
  • Table from Query is missing support for parameter Table from SQL Query.
  • Terrain Ruggedness Index (TRI) is missing support for parameter Weighting.
  • Thin Plate Spline (Global) is missing support for parameters Grid & Attribute.
  • Thin Plate Spline (Local) is missing support for parameters Attribute & Grid.
  • Thin Plate Spline (TIN) is missing support for parameters Grid & Attribute.
  • Tiling is missing support for parameters Tiles, Coordinates & Number of Grid Cells.
  • Topographic Correction is missing support for parameter Solar Position.
  • Transect through polygon shapefile is missing support for parameters Result table & Theme Field.
  • Transform Point Cloud is missing support for parameters Rotate, Input, Anchor Point, Output, Move & Scale.
  • Transform Shapes is missing support for parameters Rotate, Scale, Anchor Point & Move.
  • Trend for Shapes Data is missing support for parameters X Values, Table (with Trend) & Y Values.
  • Trend for Table Data is missing support for parameters Y Values, Table, X Values & Table (with Trend).
  • Triangulation is missing support for parameters Grid & Attribute.
  • Universal Kriging (Global) is missing support for parameters Grids, Grid, Additional Parameters, Variance & Attribute.
  • Universal Kriging (VF) is missing support for parameters Attribute, Universal Kriging, Quality Measure, Variogram, Grid & Grids.
  • Universal Kriging (VF, Global) is missing support for parameters Universal Kriging, Variogram, Quality Measure, Grids, Grid & Attribute.
  • Universal Kriging is missing support for parameters Grid, Attribute, Grids, Variance & Additional Parameters.
  • Upslope Area is interactive.
  • User Defined Filter is missing support for parameters Filter Matrix & Default Filter Matrix (3x3).
  • Variogram (Dialog)) is missing support for parameters Attribute & Semi-Variances.
  • Variogram Cloud is missing support for parameters Attribute & Variogram Cloud.
  • Variogram Surface is missing support for parameters Number of Pairs, Variogram Surface, Covariance Surface & Attribute.
  • Variogram is missing support for parameters Sample Variogram & Attribute.
  • Vector Ruggedness Measure (VRM) is missing support for parameter Weighting.
  • Visibility (single point) is interactive.
  • Wa-Tor is missing support for parameters Grid, Cycles & New Grid Dimensions.
  • Watershed Segmentation is missing support for parameter Borders.
  • Zonal Grid Statistics is missing support for parameters Zonal Statistics, Categorial Grids & Grids to analyse.

##Number of modules by unsupported SAGA parameter type

  • 82 unsupported modules depend on type Table field
  • 69 unsupported modules depend on type Data Object
  • 63 unsupported modules depend on type Grid list
  • 58 unsupported modules depend on type Table
  • 42 unsupported modules depend on type Node
  • 20 unsupported modules depend on type Shapes list
  • 20 unsupported modules depend on type Parameters
  • 13 unsupported modules depend on type Point Cloud
  • 9 unsupported modules depend on type TIN
  • 9 unsupported modules depend on type Static table
  • 2 unsupported modules depend on type Table list
  • 2 unsupported modules depend on type Color
  • One unsupported module depends on type TIN list
  • One unsupported module depends on type Colors

26 modules are not supported because they are interactive.