Network

Subnet Table

Subnet Name	VLAN ID	Network Address	Subnet Mask	Host Range	Default Gateway	DHCP Pool Range
Clinic	10	10.3.0.0/24	255.255.255.0	10.3.0.1 to 10.3.0.254	10.3.0.1	10.3.0.10 to 10.3.0.109
Visitor	20	10.3.1.0/24	255.255.255.0	10.3.1.1 to 10.3.1.254	10.3.1.1	10.3.1.10 to 1.30.1.109
Office	30	10.3.2.0/24	255.255.255.0	10.3.2.1 to 10.3.2.254	10.3.2.1	10.3.2.10 to 10.3.2.109
Counseling	40	10.3.3.0/25	255.255.255.128	10.3.3.1 to 10.3.3.126	10.3.3.1	10.3.3.10 to 10.3.3.49
Default	1	10.3.3.128/25	255.255.255.128	10.3.3.129 to 10.3.3.254	10.3.3.129	10.3.3.140 to 10.3.3.189

Hospital Router:

   enable
   configure terminal
   hostname HospitalRouter
   ip routing
   vlan 100
   name Clinic
   vlan 200
   name Visitor
   vlan 300
   name Office
   vlan 400
   name Counseling
   exit

   interface vlan 100
   ip address 10.3.0.1 255.255.255.0
   ip helper-address 10.3.3.130
   exit

   interface vlan 200
   ip address 10.3.1.1 255.255.255.0
   ip helper-address 10.3.3.130
   exit

   interface vlan 300
   ip address 10.3.2.1 255.255.255.0
   ip helper-address 10.3.3.130
   exit

   interface vlan 400
   ip address 10.3.3.1 255.255.255.128
   ip helper-address 10.3.3.130
   exit

   interface vlan 1
   ip address 10.3.3.129 255.255.255.128
   ip helper-address 10.3.3.130
   exit

   interface FastEthernet0/1
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,100,200,300,400
   switchport mode trunk

   interface FastEthernet0/2
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,100,200,300,400
   switchport mode trunk

   interface FastEthernet0/3
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 1,100,200,300,400
   switchport mode trunk

   interface vlan 1
   no shutdown

North & South Core Switches

   enable
   configure terminal
   hostname NorthCoreSwitch (or SouthCoreSwitch)
   vlan 100
   name Clinic
   vlan 200
   name Visitor
   vlan 300
   name Office
   vlan 400
   name Counseling

   interface FastEthernet0/1
   switchport mode trunk
   switchport trunk allowed vlan 1,100,200,300,400

   interface FastEthernet0/2
   switchport mode trunk
   switchport trunk allowed vlan 1,100,200,300,400

   interface vlan 1
   no shutdown

ON SOUTH CORE SWITCH ONLY:

   interface FastEthernet0/3
   switchport mode trunk
   switchport trunk allowed vlan 1,100,200,300,400

   interface vlan 1
   no shutdown

North & South Edge Switches

   enable
   configure terminal
   hostname NorthWingSwitch (or SouthWingSwitch)
   vlan 100
   name Clinic
   vlan 200
   name Visitor
   vlan 300
   name Office
   vlan 400
   name Counseling

   interface range FastEthernet0/2-7
   switchport access vlan 100

   interface range FastEthernet0/8-11
   switchport access vlan 200

   interface range FastEthernet0/12-17
   switchport access vlan 300

   interface FastEthernet0/1
   switchport mode trunk
   switchport trunk allowed vlan 1,100,200,300,400

   interface vlan 1
   no shutdown

Counseling Edge Switch

   enable
   configure terminal
   hostname CounselingEdgeSwitch
   vlan 100
   name Clinic
   vlan 200
   name Visitor
   vlan 300
   name Office
   vlan 400
   name Counseling

   interface range FastEthernet0/2-7
   switchport access vlan 100

   interface range FastEthernet0/8-11
   switchport access vlan 200

   interface range FastEthernet0/12-17
   switchport access vlan 300

   interface range FastEthernet0/18-24
   switchport access vlan 400

   interface FastEthernet0/1
   switchport mode trunk
   switchport trunk allowed vlan 1,100,200,300,400

   interface vlan 1
   no shutdown

Data Center Core Switch

   enable
   configure terminal
   hostname DataCenterCoreSwitch
   interface FastEthernet0/1
   switchport access vlan 1

   interface FastEthernet0/2
   switchport access vlan 1

   interface vlan 1
   no shutdown

DHCP Server

   Set Default Gateway to 10.3.3.129 & Interface address to 10.3.3.130
   Go to Services->DHCP
   Add records for each VLAN interface. Make sure to update maximum number of users.
   Make sure to return to this and add DNS servers to all of the entries once DNS is configured.
   NOTE: You will probably need to toggle on/off the DHCP option on all clients to refresh DNS server.

DNS Server

   Set Default Gateway to 10.3.3.129 & Interface address to 10.3.3.131
   Go to Services->DNS
   Connect the server to DataCenterCoreSwitch
   Add these records:
     dhcp.hospital.com - 10.3.3.130
     dns.hospital.com - 10.3.3.131
     web.hospital.com - 10.3.3.132

Web Server

   Set Default Gateway to 10.3.3.129 & Interface address to 10.3.3.132