1. About

The Little Chisel is the tool of choice when creating with Little Tiles.

The tool offers a wide variety of sculpting options to allow you to create almost anything. To start sculpting open the GUI by pressing C.

2. GUI

1. Changes the color of the block

2. Displays the color

3. Block selector. Click on the box to open a drop-down list of blocks to choose from. Using the Pick Block function default to middle click on your mouse also allows you to pick any block from your crosshair.

4. Chisel mode list.

5. Allows you to choose to either hollow out the previous functions as well as selecting the thickness of the function.

3. Chisel Modes

Right clicking with the chisel sets the first corner and draws a transparent preview that shows the shape and size of your structure. Right click again sets the second corner and places the shape. The chisel offers a variety of shapes:

3.1. Box

The default setting that draws a six faced polygon

3.2. Sphere

Draws an ellipse between two points

3.3. Cylinder

Draws a cylinder between two points with the added option of choosing between facing Up/Down, North/South, and East/West. The flat surfaces of the cylinder will face the choosen orientation.

3.4. Wall

Draws a wall between two points that can face U/D/N/S/E/W

3.5. Line

Draws a single tile thick line between any two points. Unlike the wall tool, the line tool is not constrained to connecting blocks on the same X, Z, or Z level.

3.6. Slice

Draws a sloped tile between two points.

Depending on the size of the selection, the slice could be in different angles:

You can change the orientation of the slice by using the arrow keys:

At this point in time there are no corner slices and no immediate plans to add them either.