Connecting RX module - Cinetronix/ronin-bridge-public GitHub Wiki

Soldering the Headers

In order to connect the TBS Crossfire/Tracer RX module to the device, follow these steps:

1. Ensure the uFL connector and LEDs of the RX module are facing up
2. Ensure the 1x4 male pin header is facing down

[picture of the installed assembled RX]

---

Attaching the RX Module to the Device

Proper antenna installation is crucial for reliable communication. To attach the RX antenna:

1. Securely attach the RX antenna to the provided antenna mount
2. Pass the antenna wire through the designated hole in the device's cover
3. Connect the uFL connector to the appropriate port
4. Connect the RX module to the device, ensuring a secure and proper connection
5. Carefully close the cover and firmly tighten the screws to secure it in place

[picture of mounted antenna]

[picture of wire in the hole]

[picture of rx with wire attached]

---