BootsNCat - Chysn/O_C-HemisphereSuite GitHub Wiki

Boots 'n Cats (BootsNCat) is a simple bass/snare drum synthesizer with stereo audio outputs.

Controls

• Digital Ins: Triggers, where Digital 1 fires the bass drum, and Digital 2 fires the snare drum
• CV Ins: Attenuation Levels, where CV 1 attenuates the bass drum, and CV 2 attenuates the snare drum
• Outputs: Audio outputs, where A/C is the bass drum output and B/D is the snare drum output, but see Blend below
• Encoder: Sets Tone and Decay for drums, and Blend

Tone

Each drum has a Tone control that sets the basic sound of the drum. For the bass drum, Tone controls the frequency, with higher values indicating a higher frequency. For the snare drum, the Tone control is more like a low-pass filter, with high values indicating a higher cutoff frequency.

Decay

Each drum has a Decay control that sets the decay of the drum between about 1/10 of a second and 1 second, with higher values indicating longer decay.

Blend

At a Blend level of 0, the bass drum and snare drum are totally isolated on Outputs A/C and B/D, respectively. As the Blend is increased, some of the signal from the opposite channel will be fed into each channel. A Blend level of 63 results in a 50/50 mix on both outputs.

Boots 'n Cats is available in Hemisphere Suite starting with V1.6.