Week 6 Labs - Cdugz/NET330-Tech-Journal GitHub Wiki

Lab 6-1:

Setting NAT interfaces:

On each router (once reached configure terminal):

• interface fastethernet 0/0
• ip address <address> <mask>
• no shutdown
• exit
• interface serial 0/0/0
• ip address <address> <mask>
• no shutdown
• exit

On second router (serial config) only:

• clock rate 64000
• bandwidth 64

Setting static NAT:

• interface fastethernet 0/0
• ip nat inside
• exit
• interface serial 0/0/0
• ip nat outside
• exit

Lab 6-2: Configuring PAT:

• Set up basic NAT (As seen above).
• Create address pools and access list parameters:
  • ip nat pool test <start IP> <end IP> <mask>
  • access-list <number> permit <ip> <wildcard mask i.e. 0.0.0.255>
  • ip nat inside source list 1 pool test overload
• To check NAT Table:
  • show ip nat translations