Lab 2‐1 - Cdugz/NET330-Tech-Journal GitHub Wiki

Commands to navigate different modes on a Cisco Switch/Router (enable, config t...) and how you know what mode you are in

• enable
• configure terminal
• (>) = User
• (#) = Priviliged
• (config)# = global configuration
• (config-if)# = interface configuration

Commands to create VLANS on switch

• vlan 110
• name Student
• exit
• copy running-config startup-config

Setting access and trunk ports on switch

• either use the gui or do:
• configure terminal
• interface gigabitEthernet 0/1
• switchport mode trink
• end

Configure interfaces in "ranges"

• configure terminal
• interface range gigabitEthernet 0/2-10
• switchport mode access
• switchport access vlan 90
• end