Downloading to FPGA Failed - CMU-18240/240-How-to GitHub Wiki

Steps to take it failed to download to FPGA

1. Check to see if the device name is right (EP4CE115F29C7)
2. Check the small SW19 to the bottom left of the FPGA -> Make sure it is set to RUN instead of PROG
3. Turn the FPGA off and on again
4. Unplug and replug the USB cable
5. In terminal, type "killall -9 jtagd", then type "jtagd" to restart jtag
6. Try another FPGA
7. Restart Quartus
8. Try another computer

If the lab computer couldn't find the FPGA then

1. Check to see if the device name is right (EP4CE115F29C7)
2. You did not log in to your afs space in terminal