Virtual implementation - C-Division-2022-2023-Odd/Repo-04 GitHub Wiki
Virtual implementation
| subsystem 1 | subsystem 2 | subsystem 3 | system | |
|---|---|---|---|---|
| 3d modeling(mechanical components) |  |
 |
 |
 |
| Flowchart |  |
 |
 |
 |
| Circuit diagram |  |
 |
 |
 |
BILL OF MATERIAL
| S.NO. | PART NAME | MATERIAL NAME WITH WHICH THE PART IS MADE UP OF | DESCRIPTION ABOUT PART | QUANTITY REQUIRED | FABRICATION PROCESS IF NEEDED |
|---|---|---|---|---|---|
| 1 | RESERVOIR | ACRYLIC SHEET | TOUGH, HIGH STRENGTH (40X40X40X60)CM | 6 | CUTTING AND BENDING |
| 2 | CONTAINER | FOAM SHEET | (8x8)CM | 2 | CUTTING AND BENDING |
| 3 | CONVEYOR BELT | CLOTH MATERIAL | 1 | STITCHING | |
| 4 | DC GEARED MOTOR | - | 12V.10RPM | 1 | - |
| 5 | MICRO SERVO MOTOR | 995mg servo | 360* | 5 | - |
| 6 | MIRO CONTROLLER | ARDUINO MEGA | AT2560 | 1 | - |
| 7 | BREAD BOAED | - | MULTIPLE CONNECTIONS | 1 | - |
| 8 | CUBE | FOAM SHEET | (2X2X2X2)CM | 3 | - |
| 9 | NYLON SLEW PIPE | - | (120X8)MM | 2 | - |
| 10 | FEWIBOND | - | - | 1 | - |
| 11 | NYLONROD | - | 25MM | 2 | - |
| 12 | NUTS-B0LTS | - | 5MM | 60 | - |
| 13 | SCREW | - | (2X20)MM | 60 | - |