Welcome to the Sovol-SV04-Klipper wiki! (Currently Work in Progress....)

Introduction Sovol-SV04-Klipper

This repository contains all the necessary configuration files for the SV04 to work with Klipper's Mirror and Copy modes, including images and descriptions.

Please always use the newest release for download! "Release"

Features

• Copy Mode (supports different temperatures but does not support first layer settings for the right Extruder)
• Mirror Mode (supports different temperatures but does not support first layer settings for the right Extruder)
• Dual Mode
• Single Mode
• Bed Mesh Levelling
• Input Shaping
• Display Functionality
• And much more...

Requirements

• Raspberry Pi 3 or newer with WiFi
  • Pi Zero won't work
  • Pi 2 may or may not work, not recommended
• Optional but recommended: Original 7" touch screen
• Optional: Camera
• SSH; For example:
  • PowerShell and Windows Terminal have SSH built-in
  • alternatively Putty or another SSH program (https://putty.org/)
• SFTP or SCP; For example:
  • FileZilla (https://filezilla-project.org/)
  • WinScp (https://winscp.net)
• Pi Imager (https://www.raspberrypi.com/software/)
• The configuration files provided in this repository
• MicroSD Card for the Raspi (min 8GB, the complete install is ~5.5GB)
• SD Card to flash the SV04 (max 8GB, formatted in Fat32 4096)

Work in progress

At the moment Cura >= 5.3 is not supported. We are working on it.

New Discord Channel

Click here for the Discord https://discord.gg/22VQXyuq

Spenden/Donations