Toolbox - BlueSCSI/BlueSCSI-v2 GitHub Wiki
BlueSCSI Toolbox is a set of utilities that interact with a BlueSCSI. It requires BlueSCSI firmware v2023.10.12 or later.
Platforms
In Progress
- NeXT
- BeOS
Classic Macintosh
Download
You can download the BlueSCSI toolbox from bluescsi.com/toolbox
Utilities
Transfer Utility
This utility allows you to transfer files to and from your SD card to and from your Mac.
- Create a folder on the root of the SD card called
shared - Use your modern computer and place files in the
sharedfolder of your SD card. You can try this with files downloaded from such sites as macintoshgarden.org - Use the Transfer Utility to copy them to your vintage computer.
- To transfer files from your Mac to the SD card go to
File -> Upload
CD Switcher
This utility allows you eject and insert another CD. Place up to 100 images in a folder called CD3 (where 3 is the SCSI ID you wish to use) on the root of your SD card. When clicking "Switch" it will eject the old CD and mount the new one.
Wi-Fi Desk Accessory
Allows you to quickly configure the WiFi interface from the Mac OS when using a Pico-W board and DaynaPORT SCSI/Link emulation. Works under System 6 or 7.
Amiga
Toolbox Apps
Supports CD changer, and SD file transfer.
via @paulroberthill
https://github.com/paulroberthill/BlueSCSI-toolbox-Amiga
WiFi
Amiga can also use BlueSCSI's WiFi feature - it is actively being worked on and you can grab the latest beta from https://github.com/RobSmithDev/daynaport-amiga/releases/tag/release
via @RobSmithDev
Atari
WiFi
BlueSCSI Wi-Fi DA: a Wi-Fi status and control Desk Accessory for BlueSCSI (Atari ST version) Written by Thorsten Otto https://github.com/th-otto/wifi_da
DOS
Requires BlueSCSI firmware v2024.05.21 or newer. Supports CD changer, and SD file transfer.
The Adaptec EZ-SCSI 4.01 drivers work best providing full ASPI layer compatibility.
NOTE: If using EZ-SCSI 5.0 or newer (for Ultra 2 or Ultra 3 cards especially), you must install Windows 3.1/3.11, the 386 Enhanced drivers, start Windows, and launch an MS-DOS prompt to use the toolbox utility. Later versions of the Adaptec drivers lack the full ASPI compatibility required.
A pre-installed and configured DOS SCSI image is available from our BlueSCSI-Images#pc page.
https://github.com/nielsmh/escsitoolbox/releases
via @nielsmh
Windows
The pre-installed and configured DOS SCSI image available from our BlueSCSI-Images#pc page already has Windows 3.11 installed and compatible drives for most of Adaptec's SCSI card range. If setting up Windows 3.1/3.11 yourself, installing the 386 Enhanced 32-bit drivers included with EZ-SCSI 4.0 or newer is recommended.
For Windows 95, NT 4.0 or newer, the native drivers work without any additional requirements.
NeXT
Please follow along here
https://tinkerdifferent.com/threads/bluescsi-toolbox-next-edition.3536/