Setup - BillyBlaze/OctoPrint-TouchUI GitHub Wiki

Touchscreen Setup

The chromium browser gives the best interaction with TouchUI and is therefore the recommended browser. Both methods are tested on a Raspberry Pi 2 and 3.

Install methods:

1. Debian Stretch, Jessie and OctoPi:
   Boot to Browser

Bootloader

1. Updating your bootloader to newer version
2. Upgrade to the new bootloader from legacy

Old methods

1. Debian Wheezy:
   Boot to Browser (quickest + best performance)

2. Debian Wheezy:
   Boot to Desktop (old method)
   This will boot your Pi to the Raspbian desktop and opens Iceweasel from there into fullscreen mode