Using SatPI as frontend for Tvheadend - Barracuda09/SATPI GitHub Wiki

Mostly used for FBC tuners during scanning.

• You should change in Tvheadend (in Advanced Settings): --> Do not forget to 'Enable' the SAT>IP Frontend of SatPI in TvHeadend
  • Grace period to 50 sec
  • Timeout (seconds) to 50 sec
  • Maximum PIDs to 20
  • Send full PLAY cmd not checked
  • Check tuner-number in signal-status messages not checked
    • When using SatPI not only for TvHeadend, and you have no Signal status info in TvHeadend.
  • Full mux RX mode supported to disabled (for FBC tuners)
• In SatPI you can adjust in the frontend tab:
  • Wait On Tuning Lock Timeout (ms) to 3500