Home - BJU-Robot-Team/Bruin-2-Master GitHub Wiki

Bruin-2-Master Build Status

The master repository for the Bob Jones University Bruin 2 autonomous vehicle

Getting started

Prerequisites

  1. VMWare or some other hypervisor, or if running natively, no hypervisor is needed
  2. Ubuntu or some other Debian-based Linux
  3. VS Code or some other code editor
  4. git: sudo apt install git
  5. Ubuntu 16.04 (xenial)

Setup

  • Clone the repo: cd ~ && git clone https://github.com/BJU-Robot-Team/Bruin-2-Master.git bruin_2_code
  • Run source ~/bruin_2_code/setup.sh to install the dependencies (This may take up to an hour)
  • Run catkin_make from ~/bruin_2_code to build the code
  • Run ./run_bruin2.sh from ~/bruin_2_code to run the code

Architecture

The Bruin-2 Robot is built on a golf cart frame with several important electronic pieces that help control it

Electronic components

Sensors

  • GPS: connected over serial at 4800 baud
  • Compass: - OS5000-US connected over serial at 19200 baud
  • Camera: connected over USB
  • LIDAR: connected over USB. Not currently connected to anything

Actuators

  • Relay Board: connected over USB, with a serial-like interface. Also has GPIO pins