6. VIRTUAL IMPLEMENTATION - B-Division-2022-2023-Odd/Repo-12 GitHub Wiki
6.1 3D MODELING
6.2 CIRCUIT DIAGRAM
6.3 FLOW CHART
Folding the cloth
Sensing and Dispensing
Folding and Dispensing
6.4 BILLS OF MATERIALS (BOM)
Sl.no. | Part name | Material used | Description | Quantity |
---|---|---|---|---|
1. | Flip board | Acrylic Sheet | Thickness-2mm (35x17.5x30)cm | 1 |
2. | Flip board | Acrylic Sheet | Thickness-2mm (17.5x17.5x30)cm | 1 |
3. | Flip board | Acrylic Sheet | Thickness-2mm (17.5x17.5x30)cm | 1 |
4. | L clamps | - | 1 inch | - |
5. | Hinges | - | 1.5inches | |
6. | Microcontroller | - | ARDUINO ATMEGA2560 | 1 |
7. | Nuts and washers | - | ||
8. | Sensor | - | IR sensor | 1 |
9. | Actuator | - | Servo motor | 3 |
10. | Buzzor | - | - | |
11. | Wires | - | ||
12. | Breadboard | - | - | 1 |