7. MOTOR SIZING AND SELECTION - B-Division-2022-2023-Odd/Repo-08 GitHub Wiki
Motor Sizing:
THE MODEL CONTAINS FOLLOWING COMPONENTS:
Sl.no. | Components |
---|---|
1 | storage |
2 | 8 .5 mm bolts |
3 | 8.5mm nuts |
4 | 1 carboard or metal body |
5 | 1 motor |
6 | 3 body plate |
7 | 1 side plate |
8 | 1 conveyor belt |
9 | 1 tape roll |
10 | Container for raw material |
NOW, volume of 1,5mm bolt=15.707cm^3 volume of 8,5 mm bolts =125.656cm^3 density=7.85kg/m3 M=986.3996 g
volume of 1, 5 mm nut=0.314cm3 volume of 8,5mm nuts=2.512cm3 density=7.85kg/m3 M=14.789kg/m3
- now volume of 4 mm nut=0.31 *our model contains 2 body plates volume of 1st body plate=70cm3 volume of 2nd body plate=45cm3 total volume of body plates=115cm3 Density of Arcylic sheet =1.15kh/m3 M=132g *Our model contain 1 side plate volume of side plate =39cm3 density = 1.15 mass =44.85g *Our model contains a box volume of box=220cm3 density of the carboard=1.55kg/m3 M=341g *Our model contains 1 conveyor belt Volume of conveyor belt = 45cm3 density=1.23kg.m3 M=55.35g
*Our model contains DC motor volume=5464cm3 density=5.464m3
#BATTERY SIZING:
1 , 30rmp DC motor load current=250mA IR sensor load current=20mA Total current=270mA SOF1.2=324mA Therefore, Required adopter is 12v&0.5A Therefore the above mentioned components are being utilized for the implimentation.