2. Gathering Pertinent Information - B-Division-2022-2023-Odd/Repo-04 GitHub Wiki

Sl.No	Name	Links
1	Divya Desai	1) https://youtu.be/v1tsnVBvwlc 2) https://youtu.be/wedW3inIizQ
2	Kashish Aradhya	1) https://www.youtube.com/watch?v=6BF9copnfS4 2)https://www.youtube.com/watch?v=uaC3WMHyLcA
3	Shrinivas v karigar	1)https://youtu.be/dB-pH9aYQ9 2)https://youtu.be/8RyhbKVWWNc
4	Akash Rathod	1)https://youtu.be/gI8JZklx4wU 2)https://youtu.be/0hizd-YZNMg
5	Harshitha	1)https://https://youtu.be/dB-pH9aYQ94 2)https://https://youtu.be/JWIQFWK9EAs

Divya Desai:

1. Arduino piggy bank (https://youtu.be/wedW3inIizQ): Automatic open and close piggy bank using arduino nano and ultrasonic sensor to sense hand wave and collect coin. it collects several of coins and locks automatically when not in use. Slot can be made open for inserting coin by simply waving at the sensor and it collects the coin.

2. Arduino piggy bank (https://youtu.be/v1tsnVBvwlc): Automatic open and close piggy bank using Arduino which senses the coin when placed on the slot and collects it. Also locks automatically when not in use.

Kashish Aradhya:

1. Arduino piggy bank (https://www.youtube.com/watch?v=6BF9copnfS4) : Coin counting bank using arduino nano the gadget is designed in such a way that it consists of a sensor which gets activated after waving of the hand it receives the coins and keep a count of how many coins is being put.Even slot is made to insert the coins.

2. Arduino piggy bank (https://www.youtube.com/watch?v=uaC3WMHyLcA) : Robot piggy bank using arduino nano when coins are placed on the hand it automatically takes up the coin and after collecting it closes it.
   

Shrinivas v karigar:

1. Arduino piggy bank( https://youtu.be/8RyhbKVWWNc) make suitable box and make a hole on the top of the box for accepting coin using small card board which is bigger than hole 10k resistor connected to card board solder wire both sides of the resistor and a single wire another side and fix 90 SG servo motor inside of the top of the box and also fix rduino unoR3 board card board connection. Resistor black wire _GND. Resistor white wire _pin11. Single white wire _3.3V. Servo motor connection. Red_5V. And brown _GND and yellow pin12 and attach 9V battery.

   2. Arduino piggy bank (https://youtu.be/JWIQFWK9E) Using card board make a square box and using card board make a suitable holes circuit connection. TCRT5000(1Rsensor) 10ohm resistor and jumper wires and another circuit 16*2LCD module and 12C LCD module

Akash Rathod:

1. https://youtu.be/gI8JZklx4wU Automatic coin collecting box which has a slot to insert the coins and have a lock system.It includes a door from which we can take out the coins easily and also a security system which is being secured by a password.

2. https://youtu.be/0hizd-YZNMg Coin collecting bank using Arduino when coin placed on the sensor the machine automatically takes the coins in the box and closes it and collects the coins in it.

Harshitha :

1. https://youtu.be/dB-pH9aYQ94 when u insert acoin on the floor, the imposter gets out of the ventilation closet and steals your coin IT IS A MECHNICAL COIN BANK BOX WITH HIDDEN IMPOSTER STEALING COINS you can repeat the production according to the instructions .then your coins will be under reliable protection. things needed: 1.cardboard 2.dc motors 3.9v battery 4.wire connector 5.ice cream stick 6.bbq bamboo stick 7.office button 8.rubber bands.

2. https://https://youtu.be/JWIQFWK9EAs this piggy bank will help you to make coin sorting and counting bank .all you need is some cardboard,10k ohm resistor ,TCRT5000 IR sensor, jumper wires,arduio nano,16X LCD,12C LCD MODULE,9V battery,switch.