1 |
Smart Waste Separator |
The device uses its components and senses a presence using sensors and guides the user using voice instructions to actively dump the wastes respectively into wet and dry bins through coded instructions. |
Speaker, Audio Jack, Adaptor, Wires, USB cables, Memory card, Breadboard, HC-SR04 sensors, LED's |
https://www.instructables.com/Smart-SegregatorDustbin/ |
Srinidhi K-256 |
2 |
Smart Dustbin |
This device is sensor-based and begins by sensing a presence and basically tells where to put what kind of waste. The dustbin lids are also motion sensed and no touch and open for only a period of 5 to 6 seconds and automatically close. This fast movement ensures odour control and seals air inside itself. |
IR-Sensors, Wires, Speaker, Adaptor, USB Cables, Breadboard, HC-SC04 sensors. |
https://youtu.be/F6XndxlJr9A |
Srinidhi K.-256 |
3. |
Smart Waste Manager |
Smart Trash Can which can sense automatically and opens on it own |
Aurdino UNO R3, ultrasonic module,Aurdino board,LED,mini gear servo, flexible wire,motor,9v battery power plug |
https://youtu.be/mHaeDoFOVX0 |
prakruthi.s 258 |
4. |
Smart Waste Separator |
This device can detect when we bring waste in front of it and will sense it on its own and separte it. |
Aurdino UNO, ultrasonic sensor, servo motor,jumper wire,battery, wires, plastic box, batteries connectors,creative tools |
https://youtu.be/-K_yhjdgJA8 |
prakruthi.s258 |
5. |
Smart Trash Bin |
This device is sensor based and cap of can not open when the hand is above the sensor and will close some time after you remove your hand |
range sensor,servo,batteryholder,box, resistor, highly recommend electrolytic capactor,arduinonano,USB cables,wires ,adapter |
https://youtu.be/KHysNei2bq8 |
Mallikarjun J K-250 |
6. |
Solar Trash Can |
The solar panel is mounted on every bin and sunlight is collected and is converted into energy in the battery once it fully charged it works upto 4 weeks. most importantly it can reduce operational costs of waste upto 80% |
solar panel,wires, bin USB cables |
https://youtu.be/EB68M2SRL1o |
Mallikarjun J K-250 |
7. |
Smart dustbin with Arduino |
This model helps us to create dustbin which opens and closes as and when it detects someone approaching near it. |
Arduino sensor,Arduino Uno,9g servo |
https://youtu.be/9yrP1CZN3Ds |
Santosh S K, 203 |
8. |
solar powered smart dustbin |
this model not only automatically opens or closes the lid but also compresses the trash and is poered with a solar panel and |
GSM module,solar panel,ultrasonic sensor,compressor |
https://youtu.be/Sp9AqeJl2u8 |
Santosh S K,203 |
9. |
Smart garbage monitoring system |
It uses IOT, this model with the help of the ultrasonic sensors and other components help in detecting the amount or height of the waste accumulated in the dustbin, hence helps in early detection and dumping of the wastes before it overflows. |
1. Aurdino 101 XSeeed base shield V2 X 1,Arduino Wifi Shield 101 X 1,Arduino MKR1000 X 1,Ultrasonic sensor-HC-SR04[Generic],6.9V Battery[Generic],9V Battery clip X 10,Jumper Wires [Generic] X 1,Slide switch X 1,LED [Generic] X 3 |
https://youtu.be/gvMnWKEsWWs |
Laxmi Kulloli-254 |
10. |
Auto open/close smart trash bin |
This smart trash bin with the installed sensors automatically opens and closes the lid of the dustbin when it senses a waste in the closer proximity |
1.Arduino UNO X 1,Ultra sonic sensor-HC-SR04[Generic] X 1,Servos[Tower Pro MG996R]X 1,UTSOURCE Electronic Parts |
https://youtu.be/0gYgK0xUwfA |
Laxmi Kulloli - 254 |