Arc: Loader Portmap - AuxXxilium/AuxXxilium GitHub Wiki

Only necessary for nonDT Models - Only for Sata Controller

• If you don't know anything about SataPortMap, SataRemap or AhciRemap. Look at Sysinfo in Arc and look at your Drive Mapping. Now you can choose an Option.
• Please avoid empty Slots on Sata Controller (if possible), this will make things easier.
• In VM with Sata Controller, map your Loader to 0:0 and Data to "0:1 ... 0:2 ... 0:3" or "1:0 ... 1:1 ... 1:2" and so on...

Use SataPortMap (controller active Ports)

• Normally you can select this. If you have empty Ports after used Sata Ports, this will remove the unused Ports.

Use SataPortMap (controller max Ports)

• This sets the SataPortMap to max Portcount of your Controller.

Use SataRemap (remove blank drives)

• This Option removes empty Ports, if you see some empty or dummy Ports of your Controller.
• It removes the Drive 1 empty Slot while using ESXi. (You have to Map all Drives to SATA Controller, SAS/SCSI Ports will not be usable.)

Use AhciRemap (remove blank drives)

• This Option removes empty Ports, if you see some empty or dummy Ports of your Controller.
• It removes the Drive 1 empty Slot while using ESXi. (You have to Map all Drives to SATA Controller, SAS/SCSI Ports will not be usable.)