Prepare and Install the SD Card (ADRV9002) - ArrowElectronics/data-storm-daq GitHub Wiki

This can be done with a Windows host. Follow the instructions included in the case in which your kit was shipped to determine whether this step is required, or check the contents of the SD card on your host file system. If you don't see the image already installed, then proceed with the instructions below.

Note : This requires a 16GB micro-SD card

1. Download the SD card image adrv9002_tei0022_03_20211103.tar.gz

2. Extract the SD card image from the binaries archive using 7-Zip

Since the file is a tar.gz, two passes of 7-Zip will be required to extract the SD card image file.

3. Get disk imaging software Win32diskimager

4. Insert the SD Adaptor. Use Windows Explorer to determine the drive letter

5. Select the Image File. Navigate to adrv9002_tei0022_03_20211103

6. Press the Write button

Return to ADRV9002 Quick Start Guide
Next - Run the Demonstration Standalone or
Next - Run the Demonstration via Ethernet or
Next - Run the no-OS Demonstration Standalone