Install Required Hardware (ADRV9002) - ArrowElectronics/data-storm-daq GitHub Wiki

Install Required Hardware (ADRV9002)

Table of Contents

  1. Configuration for local IIO Oscilloscope access
  2. Configuration for remote IIO Oscilloscope access via ethernet

Configuration for local IIO Oscilloscope access



The DataStorm DAQ development kit is designed to run as a standalone desktop computer. Connect a keyboard, mouse and HDMI display to operate in this mode.

The ADRV9002 Evaluation Platform in this configuration is comprised of the following components:

  • Analog Devices EVAL-ADRV9002NP/W1/PCBZ data converter board
  • Trenz Intel® Cyclone® V SoC TEI0022 Development Board (includes 12VDC power supply)
  • Signal Generator for input signal
  • Optional Signal Generator for Reference Clock
  • Signal Analyzer
  • Two (2) BNC to SMA Cables
  • Monitor with HDMI input
  • HDMI cable
  • Keyboard and Mouse with USB connectors

Assemble the Hardware

Follow the steps in the order shown below.

  1. Insert the EVAL-ADRV9002NP/W1/PCBZ FMC connector into the FMC mating connector on the Trenz TEI0022 board
  2. Attach the monitor to the TEI0022 using an HDMI cable
  3. Attach the keyboard and mouse to the TEI0022 using any of the 4 USB ports
  4. Connect the Signal Generator to the EVAL-ADRV9002NP/W1/PCBZ SMA connectors
  5. Connect the power supply to the TEI0022
  6. Plug the AC-DC adapter into an AC outlet

Configuration for remote IIO Oscilloscope access via ethernet

The ADRV9002 Evaluation Platform in this configuration is comprised of the following components:

  • Analog Devices EVAL-ADRV9002NP/W1/PCBZ data converter board
  • Trenz Intel® Cyclone® V SoC TEI0022 Development Board (includes 12VDC power supply)
  • Signal Generator for input signal
  • Optional Signal Generator for Reference Clock
  • Signal Analyzer
  • Two (2) BNC to SMA Cables
  • Computer with IIO Oscilloscope installed
  • Ethernet Cable
  • Micro USB cable

Assemble the Hardware

Follow the steps in the order shown below.

  1. Insert the EVAL-ADRV9002NP/W1/PCBZ FMC connector into the FMC mating connector on the Trenz TEI0022 board
  2. Attach PC via ethernet cable
  3. Attach the Micro USB cable
  4. Connect the Signal Generator to the EVAL-ADRV9002NP/W1/PCBZ SMA connectors
  5. Connect the power supply to the TEI0022
  6. Plug the AC-DC adapter into an AC outlet

Next- Install Required Software

Return to ADRV9002 Quick Start Guide

Please click Here to purchase platform boards

⚠️ **GitHub.com Fallback** ⚠️