1. Configuration for local IIO Oscilloscope access
2. Configuration for remote IIO Oscilloscope access via ethernet

The DataStorm DAQ development kit is designed to run as a standalone desktop computer. Connect a keyboard, mouse and HDMI display to operate in this mode.

The AD7768-1 Evaluation Platform in this configuration is comprised of the following components:

• Analog Devices EVAL-AD7768-1FMCZ data converter board
• Trenz Intel® Cyclone® V SoC TEI0022 Development Board (includes 12VDC power supply)
• Signal Generator with dual outputs capable of channel tracking and inversion for differential outputs
• Two (2) BNC to SMA Cables
• Monitor with HDMI input
• HDMI cable
• Keyboard and Mouse with USB connectors

Follow the steps in the order shown below.

1. Insert the EVAL-AD7768-1FMCZ FMC connector into the FMC mating connector on the Trenz TEI0022 board
2. Attach the monitor to the TEI0022 using an HDMI cable
3. Attach the keyboard and mouse to the TEI0022 using any of the 4 USB ports
4. Connect the Signal Generator to the EVAL-AD7768-1FMCZ SMA connectors
5. Connect the power supply to the TEI0022
6. Plug the AC-DC adapter into an AC outlet

The AD40xx® Evaluation Platform in this configuration is comprised of the following components: The AD40xx Evaluation Platform in this configuration is comprised of the following components:

• Analog Devices EVAL-AD7768-1FMCZ data converter board
• Trenz Intel Cyclone V SoC TEI0022 Development Board (includes 12VDC power supply)
• Computer with IIO Oscilloscope installed
• Ethernet Cable
• Micro USB cable
• Signal Generator with dual outputs capable of channel tracking and inversion for differential outputs
• Two (2) BNC to SMA Cables

Follow the steps in the order shown below.

1. Insert the EVAL-AD7768-1FMCZ FMC connector into the FMC mating connector on the Trenz TEI0022 board
2. Attach PC via ethernet cable
3. Attach the Micro USB cable to the micro-USB connector for UART access
4. Connect the Signal Generator to the EVAL-AD7768-1FMCZ SMA connectors
5. Connect the power supply to the TEI0022
6. Plug the AC-DC adapter into an AC outlet

---

Next- Install Required Software

Return- to AD7768-1 Quick Start Guide