1. Configuration for local IIO Oscilloscope access
2. Configuration for remote IIO Oscilloscope access via ethernet

The DataStorm DAQ development kit is designed to run as a standalone desktop computer. Connect a keyboard, mouse and HDMI display to operate in this mode.

The AD738x demonstration uses AD7380® or AD7381® Evaluation Platform in this configuration which is comprised of the following components:

• Analog Devices EVAL-AD7380-FMCZ or EVAL-AD7381-FMCZ data converter board
• DataStorm DAQ (Trenz Intel® Cyclone® V SoC TEI0022 Development Board ) (includes 12VDC power supply)
• Digilent Analog Discovery 2 Signal Generator with dual outputs
• Digilent Discovery BNC adapter board
• Two (2) BNC male to SMB Female Cables
• Monitor with HDMI input
• HDMI cable
• Keyboard and Mouse with USB connectors
• Separate Windows PC running Digilent WaveForms App

Follow the steps in the order shown below.

1. Insert the EVAL-AD738x-FMCZ FMC connector into the FMC mating connector on the DataStorm DAQ board
2. Attach the monitor to the DataStorm DAQ using an HDMI cable
3. Attach the keyboard and mouse to the DataStorm DAQ using any of the 4 USB ports
4. Connect the Signal Generator to the EVAL-AD738x-FMCZ SMA connectors
5. Ensure that Jumper LK4 is on position 3,4 for setting external reference to +3.3V, Jumper LK3 is in position 1,2 to to get +12V from FMC on the EVAL-AD738x-FMCZ board, Jumper LK5 is in position 3,4 to get onboard vlogic supply on AD738x. Ensure Jumper LK1 & LK2 is in position 1,2.
6. Connect the power supply to the DataStorm DAQ
7. Plug the AC-DC adapter into an AC outlet

The AD738x demonstration uses AD7380® or AD7381® Evaluation Platform in this configuration which is comprised of the following components:

• Analog Devices EVAL-AD7380-FMCZ or EVAL-AD7381-FMCZ data converter board
• DataStorm DAQ (Trenz Intel Cyclone V SoC TEI0022 Development Board) (includes 12VDC power supply)
• Host Windows PC with IIO Oscilloscope and Digilent WaveForms App installed
• Ethernet Cable
• Micro USB cable
• Digilent Analog Discovery 2 Signal Generator with dual outputs
• Digilent Discovery BNC adapter board
• Two (2) BNC male to SMB Female Cable

Follow the steps in the order shown below.

1. Insert the EVAL-AD738x-FMCZ FMC connector into the FMC mating connector on the DataStorm DAQ board
2. Attach PC via ethernet cable
3. Attach the Micro USB cable to the micro-USB connector for UART access
4. Connect the Signal Generator to the EVAL-AD738x-FMCZ SMA connectors
5. Ensure that Jumper LK4 is on position 3,4 for setting external reference to +3.3V, Jumper LK3 is in position 1,2 to to get +12V from FMC on the EVAL-AD738x-FMCZ board, Jumper LK5 is in position 3,4 to get onboard vlogic supply on AD738x. Ensure Jumper LK1 & LK2 is in position 1,2.
6. Connect the power supply to the DataStorm DAQ
7. Plug the AC-DC adapter into an AC outlet

---

Next- Install Required Software

Return to AD738x Quick Start Guide