The SPI Engine Offload peripheral enables storing a SPI Engine command and SDO data stream in a RAM or ROM module. The command stream is executed when the trigger signal is asserted. This allows the execution of SPI transactions with a very short delay in reaction to a event.

Name	Description
spi_engine_offload.v	Verilog source for the peripheral.
spi_engine_offload_hw.tcl	TCL script to generate Platform Designer IP for the peripheral

Name	Description	Default
SPI_CLK_ASYNC	If set to 1 the ctrl_clk and spi_clk are assumed to be asynchronous	0
CMD_MEM_ADDR_WIDTH	Configures the size of the command stream storage. The size is 2**CMD_MEM_ADDR_WIDTH entries.	4
SDO_MEM_ADDR_WIDTH	Configures the size of the SDO data stream storage. The size is 2**SDO_MEM_ADDR_WIDTH entries.	4

Name	Type	Description
ctrl_clk	Clock	The spi_engine_offload_ctrl signals are synchronous to this clock.
spi_clk	Clock	The spi_engine_ctrl signals, offload_sdi signals and trigger are synchronous to this clock.
spi_resetn	Synchronous active low reset	Resets the internal state machine of the core.
trigger	Input	When asserted the stored command and data stream is send out on the spi_engine_ctrl interface.
spi_engine_offload_ctrl	SPI Engine Offload Control Interface slave	Control interface which allows to re-program the stored command and SDO data stream.
spi_engine_ctrl	SPI Engine Control Interface master	SPI Engine Control stream that contains commands and data.
offload_sdi	Streaming AXI master	Output stream of the received SPI data

---

Return to AD7768-1 Platform FPGA Architecture
Return to Platform Architecture Table of Contents

Information on this site was obtained from