Agilex 5 E Series AXE5000 Development Platform - ArrowElectronics/Agilex-5 GitHub Wiki
Arrow AXE5000 Development Platform featuring the Altera™ Agilex® 5 E-Series
This Arrow Electronics full-featured development kit uses the latest Altera™ Agilex® 5 E-series FPGA.
Arrow’s Devkit enables customers to evaluate the features of the Agilex® 5 E and speed up their development. With the CRUVI HS and Arduino MKR connectors, various adapter boards can be connected, to add more peripherals.
Completed reference designs are provided with a Quick Start guide, and instructions on how to rebuild the design.
The AXE5000 is an FPGA board, based on Altera™ Agilex® 5 E-Series FPGA (no HPS).
- Altera™ Agilex® 5 E-Series FPGA (A5EC0608BM16AE6S)
- Package: MBGA 896-pin 16mm x 16mm 0.5mm pitch (M16A)
- Speed Grade: 6
- Temperature: Extended (Tj = 0 °C to 100 °C)
- 128 Mb HyperRAM 2.1 x8 pSRAM
- 256 Mb QSPI for configuration via the SDM
- USB Blaster III
- 3-axis Accelerometer
- 2x RGB LED's
- 1x LED
- 2x DIP Switches
- 2x Buttons
- 1x CRUVI HS Connector
- 1x Arduino MKR Connector
- UART via USB Blaster Connector
- 5 V Input supply voltage via USB-C Connector
The following platforms are ready to be used in their existing state and do not require additional development effort
- AXE5-Eagle User Guide
- Board Block Diagrams
- Board Schematics
- Board Assembly Diagram
- Board Bill of Materials
YOU TAKE ALL SUCH PRODUCTS AND SERVICES “AS-IS” WITHOUT ANY WARRANTY. THERE ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND BY SELLER, EXPRESS OR IMPLIED, AS TO THE CONDITION OR PERFORMANCE OF ANY PRODUCTS OR SERVICES, THEIR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, NON-INFRINGEMENT, OR OTHERWISE. SELLER ASSUMES NO RESPONSIBILITY OR LIABILITY FOR SUPPLIERS’ PRODUCT OR SERVICE SPECIFICATIONS OR THE PERFORMANCE OR ADEQUACY OF ANY DESIGN OR SPECIFICATION PROVIDED TO SELLER.
All rights in intellectual property owned or licensed by Seller or Supplier are hereby reserved and deemed restricted or limited. Seller makes no representation or warranty with respect to such rights and will have no liability in connection with them. You agree to comply with all requirements with regard to any intellectual property (including any requirement to enter into a separate license agreement and prohibitions against duplicating, reverse engineering, or disclosing the same). You shall indemnify Seller against and defend and hold it harmless from all liability, cost, or expense arising out of or relating to any (a) breach or alleged breach of these terms and conditions, (b) allegation or claim, including infringement claims, that arise from Your use of Products or services in combination with other products or services, or (c) alleged or actual infringement of any intellectual property rights provided by You to Seller.