Agilex 5 E Series AXE5 Eagle Development Platform - ArrowElectronics/Agilex-5 GitHub Wiki
Arrow AXE5-Eagle Development Platform featuring the Intel Agilex® 5 E-Series
- Overview
- Introduction
- Getting Started
- Unboxing
- Reference Designs
- Demonstrations
- Documentation
- Notes
- Terms of Use
This Arrow Electronics full-featured development kit uses the latest Intel® Agilex® 5 E-series SoC FPGA.
Arrow’s Devkit enables customers to evaluate the features of the Agilex® 5 E and speed up their development. With the FMC and CRUVI LS/HS connectors, various adapter boards can be connected, to add more peripherals.
Completed reference designs are provided with a Quick Start guide, and instructions on how to rebuild the design. Complete bootable SD card images are also provided for each reference design.
The AXE5-Eagle is an SoC board, based on Intel® Agilex® 5 E-Series SoC FPGA.
- Intel® Agilex® 5 E-Series SoC FPGA (A5ED065BB32AE4S)
- Package: BGA 1596-pin 32mm x 32mm (B32A)
- Speed Grade: 4
- Temperature: Extended (Tj = 0 °C to 100 °C)
- 1 GB LPDDR4 SDRAM for HPS
- 1 GB LPDDR4 SDRAM for FPGA Fabric
- 2 Gb QSPI for configuration via the SDM
- microSD Card cage connected to the HPS
- EEPROM
- 2x Temperature Sensors
- LED's & Buttons
- FMC+ Connector
- 2x CRUVI HS Connector
- 2x CRUVI LS Connector
- JTAG
- UART via JTAG header (for FPGA)
- UART via micro USB B Connector (for HPS)
- 4-port USB HUB supporting 2.0 or 3.1 devices
- 2x 1Gb Ethernet via RJ45 Connector
- microSD connector
- HDMI output
- 2x 10Gb SFP+ cages
- RGB LEDs
- Push-Buttons
- DIP Switches
- 12 V Input supply voltage
The following platforms are ready to be used in their existing state and do not require additional development effort
- AXE5-Eagle User Guide
- Board Block Diagrams
- Board Schematics
- Board Assembly Diagram
- Board Bill of Materials
YOU TAKE ALL SUCH PRODUCTS AND SERVICES “AS-IS” WITHOUT ANY WARRANTY. THERE ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND BY SELLER, EXPRESS OR IMPLIED, AS TO THE CONDITION OR PERFORMANCE OF ANY PRODUCTS OR SERVICES, THEIR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, NON-INFRINGEMENT, OR OTHERWISE. SELLER ASSUMES NO RESPONSIBILITY OR LIABILITY FOR SUPPLIERS’ PRODUCT OR SERVICE SPECIFICATIONS OR THE PERFORMANCE OR ADEQUACY OF ANY DESIGN OR SPECIFICATION PROVIDED TO SELLER.
All rights in intellectual property owned or licensed by Seller or Supplier are hereby reserved and deemed restricted or limited. Seller makes no representation or warranty with respect to such rights and will have no liability in connection with them. You agree to comply with all requirements with regard to any intellectual property (including any requirement to enter into a separate license agreement and prohibitions against duplicating, reverse engineering, or disclosing the same). You shall indemnify Seller against and defend and hold it harmless from all liability, cost, or expense arising out of or relating to any (a) breach or alleged breach of these terms and conditions, (b) allegation or claim, including infringement claims, that arise from Your use of Products or services in combination with other products or services, or (c) alleged or actual infringement of any intellectual property rights provided by You to Seller.