The AXC3000 Starter Kit is based on the Altera Agilex-3 85KLE FPGA. It has a HyperRAM memory which can be used for user data storage, or storing NIOS-V execution code. The Agilex™ 3 device with the memory allows this kit to be used for various applications including camera and vision applications. Configuration of the Agilex™ 3 FPGA is done via a 256 Mbit flash, which has additional free space for further data storage. Two RGB LEDs, a 3-axis accelerometer sensor. Due to the low power consumption of the Agilex™ 3, the AXC3000 can be powered via USB, or via an additional 5V power supply. Arrow’s AXC3000 Starter Kit enables customers to evaluate the features of Intel Agilex™ 3 and speed up development. With the CRUVI HS connector and Arduino MKR standard pads, various adapter boards can be connected to this kit to further create other applications. The board features the new Altera UB3 programmer and debugger for the FPGA.

The board is 25mm x71mm.

Altera Agilex 3 FPGA
The boards has the A3CYBM16AE7S Agilex-3 FPGA with these major features:

• 100,300 Logic Elements (LE)
• 262(5.12Mb) M20K Memory
• 276 18x19 Multipliers
• 40 HVIO (1.8V - 3.3V) I/O pins
• LVDS pairs at 1.25 Mbps
• Secure Device Manager

Altera UB3 USB Blaster
3-axis Accelerometer
Winbond hyperRAM
Micron 256Mb QSPI
mini-DIP switches
nCONFIG Push Button (Resetn)
User Push Button
2x RGB LEDs
Red LED
Molex USB2.0 Type C connector
Samtec CRUVI-HS connector
TDK uPOL power modules
Arduino MKR standard pads
Skyworks 25MHz oscillator

---

Return - Developer Documentation

Return - AXC3000 Development Platform