The original model has been taken from Google's 3D Warehouse and modified to be 3D-printable.

3D Warehouse user: Giganaut233

3D Warehouse model: T-35

Common changes done to original model:

• Added more edges to curves and circles to smoothen geometry and refine details.
• Divided model into smaller sections allowing it to be printable on a wider array of 3D printers.
• Modified turret design to allow for rotation.

Parts come together with glue. Inserts have been added to aid with aligning the pieces perfectly.

The displayed example was printed using the default 0.15mm layer height quality setting on PrusaSlicer. Infill was 5% and a gyroid pattern. The inserts were printed at 0.3mm layer thickness to reduce time since those parts were not aesthetic-critical components.

Inserts come in two varieties: 0.2mm offset tolerance and 0.3mm. If your printer is not fine-tuned for high-tolerance prints, it is recommended to use 0.3mm offset inserts. 0.2mm offset tolerance inserts fit perfectly into the holes for displayed model.

Number of inserts that need to be printed is in the insert's file name after the "x"

When slicing, you don't need to use supports! Just print as-is.

Length: ~16.7in or ~42.5cm

Width: ~5.9in or ~14.9cm

Height: ~5.7in or ~14.6cm

3D printer: Prusa MK3S

Supports: none

Resolution: 0.15mm

Infill: 5%

Filament material: PLA