i2cackpoll - Anobium/Great-Cow-BASIC-Help GitHub Wiki

I2CAckpoll

Syntax:

  I2CAckpoll ( I2C_device_address )

Command Availability:

Available on all microcontrollers except 12 bit instruction Microchip PIC microcontrollers (10F, 12F5xx, 16F5xx chips)

Explanation:

Should only be used when I2C routines are operating in Master mode, this command will look for a specific I2C device on the I2C bus.

This sets a global variable I2CAckPollState that can be inspected in your calling routine.

Example:

    ...
    ' ACK polling removes the need to for the 24xxxxx device to have a 5ms write time
    I2CACKPOLL( eeprom_device )
    ' You check the exit state, use I2CAckPollState to check the state of
    ' the acknowledge from the target device
     ...

Supported in <I2C.H>

⚠️ **GitHub.com Fallback** ⚠️