hserreceivefrom - Anobium/Great-Cow-BASIC-Help GitHub Wiki

HSerReceiveFrom

Syntax:

  user_byte = HSerReceiveFrom [,1 | 2 | 3 | 4]
  user_byte = HSerReceiveFrom         'Defaults to USART1

  'other Receive functions
  user_byte = HSerReceive1    'from USART1
  user_byte = HSerReceive2    'from USART2

Command Availability:

Available on all microcontrollers with a USART or UART module.

Microchip PIC supports USART1 and 2.
Atmel AVR supports USART 1,2,3 and 4.

Enabling Constants:

To enable the use of the USART these are the enabling constants.   These constants are required.  You can change the USART_BAUD_RATE and to meet your needs.  For addition USART ports use #define USARTn_BAUD_RATE 9600 where n` is the required port number.

    'USART settings for USART1
    #define USART_BAUD_RATE 9600
    #define USART_TX_BLOCKING
    #define USART_DELAY OFF

Explanation:

This command will read a byte from the hardware RS232 module. It can be only be used as a function. It will return the received value.

Example:

  'This program will read a value from the USART, and display it on PORTB.

  #chip 16F877A, 20

  'USART settings
  #define USART_BAUD_RATE 9600
  #define USART_BLOCKING
  #define USART_TX_BLOCKING


  'Set PORTB to input
  Dir PORTB Out
  'Set USART receive pin to input
  Dir PORTC.7 In

  'Main loop
  Do
    'Get byte value
    bytein = HSerReceiveFrom (2)
    'do something useful
  Loop

See also HSerReceive

⚠️ **GitHub.com Fallback** ⚠️