Home - Alshain-Oy/Strix GitHub Wiki
Strix SMU user guide
Specs
- Max voltage range: -17 V .. 17 V
- Max current range: -17 mA .. 17 mA
- Voltage ranges:
- ±17 V
- ±2.5 V
- ±0.3 V
- Current ranges:
- ±17 mA
- ±100 µA
- ±1 µA
- ±10 nA
- DC accuracy: <0.02% with factory calibration
- Integrated temperature stabilization to reduce drifts and gain errors
- Noise equivalent number of digits: 5 digits ( 200ms integration time )
- Sub-picoamp current sensitivity at 10nA range
- Up to 32 Strix units can be daisy-chained together
- Connectors: 6x SMA (front panel), 1x 2.6 DC jack, 2x DSUB9
- Made in Finland
Installation
Software requirements:
- Python 3.x
- Requires Pyserial library
- FTDI VCP Driver
Front panel
Connectors:
- Drive+ Positive drive terminal
- Guard Guard voltage output, follows either Drive+ or Sense+
- Sense+ Positive terminal for 4-wire operation
- Sense- Negative terminal for 4-wire operation
- Drive- Negative drive terminal, all current flowing out from Drive+ must go into this terminal
- Ext Additional voltage input ( range: -2.5V .. 2.5V )
All SMA connector shields are connected to the system ground.
Operating principles
Strix uses a transimpendace amplifier to measure current so DUT must be floating.