PN532 - ARK-IoT/ark-hackathon GitHub Wiki
welcome aboard > kit > modules > Adafruit PN532 NFC/RFID Breakout Board
[Adafruit PN532 NFC/RFID Breakout Board]
pinout
specs
- 2" (51mm) x 4.7" (117.7mm) and 0.425" (1.1mm) thick.
- This board/chip uses I2C 7-bit address 0x48
- https://www.adafruit.com/product/364
The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! We also include onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc. src: adafruit.com
guides
| guide | url |
|---|---|
| Adafruit: PN532 RFID/NFC Breakout Board | https://learn.adafruit.com/adafruit-pn532-rfid-nfc/overview |
| Python NFC Documentation | http://nfcpy.readthedocs.io/en/latest/ |
libraries
| library | url |
|---|---|
| github: Libnfc | https://github.com/nfc-tools/libnfc |
| github: Dons NDEF Library | https://github.com/don/NDEF |
| github: Adafruit PN532 | https://github.com/adafruit/Adafruit-PN532 |
| github: Adafruit Python pn532 | https://github.com/adafruit/Adafruit_Python_PN532 |
| github: NFC - Ruby | https://github.com/tenderlove/nfc |
| github: ESPnfc | https://github.com/Robotto/ESPnfc |
| github: PN532 | https://github.com/nfc-tools/libndef |
| github: NFC | https://github.com/happy-bubbles/nfc |
| github: Phonegap NFC | https://github.com/don/phonegap-nfc |
| github: Beginning NFC | https://github.com/tigoe/BeginningNFC |
| github: Doorlock Raspberry Pi | https://github.com/emersonmello/doorlock_raspberrypi |
| github: NFC | https://github.com/fuzxxl/nfc |
| github: Bitcoin NFC | https://github.com/720kb/BitNFC |
| RFIDIOt | https://github.com/AdamLaurie/RFIDIOt |