Introduction

AIDA integrates with WTEC to manage zones, devices, and scenes efficiently. A zone is a cluster of multiple WTEC devices, and each zone can be controlled within AIDA. This guide provides instructions for managing zones, devices, and scenes in the AIDA system.

---

Zone Management

How to Create a Zone in AIDA

1. Navigate to Zone Setup in the WTEC sidebar.

2. The zone list page will be displayed.

3. Click Add New Zone.

4. A modal window will appear with zone details.

5. Enter the zone name and zone UUID.

6. Add scenes with add scene button.

7. Click the Save button.

8. The new zone will appear in the listing area.

How to Edit a Zone

1. Navigate to Zone Setup in the WTEC sidebar.

2. The zone list page will be displayed.

3. Click the Edit (pencil) icon for the desired zone.

4. A modal window will appear with the zone details.
5. Modify the zone details and scenes as needed.

6. Click the Save button.

How to Delete a Zone

1. Navigate to Zone Setup in the WTEC sidebar.

2. The zone list page will be displayed.

3. Click the Delete (trash) icon for the desired zone.
4. A confirmation modal window will appear.

5. Click OK to delete the zone.

---

WTEC Device Management

How to Add a WTEC Device in AIDA

1. Navigate to Setup in the WTEC sidebar.

2. The device list page will be displayed.

3. Click Add New WTEC.

4. A modal window will appear with device details.

5. Enter the device name, IP address, and other details.

6. Select the zone to which the device is connected.

7. Select Add zone option and eneter zone details, if zone not available.

8. Click the Save button.

9. The new device will appear in the listing area.

How to Edit a WTEC Device

1. Navigate to Setup in the WTEC sidebar.

2. The device list page will be displayed.
3. Click the Edit (pencil) icon for the desired device.

4. A modal window will appear with device details.
5. Modify the necessary details.

6. Click the Save button.

How to Delete a WTEC Device

1. Navigate to Setup in the WTEC sidebar.

2. The device list page will be displayed.
3. Click the Delete (trash) icon for the desired device.

4. A confirmation modal window will appear.

5. Click OK to delete the device.

---

Send Command to device

How to Send Scene Commands to Devices

1. Navigate to Control in the WTEC sidebar.

2. The control page will be displayed.

3. Select target zone.

4. User can control (Light On, Light Off, Dim Level and Defined Scenes) device zone based.

5. Scenes available in the zonewill be list, when change zone.

6. Scenes commands also send from zone listing pages.

---

Conclusion

The integration of WTEC with AIDA allows users to efficiently manage zones, devices, and scenes from a centralized interface. By following the steps outlined in this guide, users can easily create, edit, delete, and control WTEC zones, devices, and scenes within AIDA, ensuring seamless operation and optimal control over connected systems.