-------------------------------------------------------------------------------------------------------
Job 1: Ngamai-baaj.b "Reconfig & Run on Raijin - NWP settings (fm xbcnp -baajz)"
Job 2: Ngamai-baap.q "N512 Um8.2 Fc NCI with Gen2 correction (FM xbjin)"
Date: 20140904 LONG COMPARISON
-------------------------------------------------------------------------------------------------------
1. snip: -not significant-
2. snip: -not significant-
3. snip: -not significant-
4. snip: -not significant-
5. snip: -not significant-
6. snip: -not significant-
7. snip: -not significant-
8. snip: -not significant-
9. In window <subindep_HandEdit>:
-> Model Selection
-> Input/Output Control and Resources
-> User hand edit files
Variable: <HEDFILE>
Differences in Table Hand edits
1,6c1,6
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_stashc_DUSTPS32 Y
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_foamblk_tstar N
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_foamout N
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_pwr7_env_vars N
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_IOSRV_QG Y
< ~access/da/nwp_input/um/UMUI_IN/GL_HANDEDITS_8.2_SMNSout_10minTS Y
---
> ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_stashc Y
> ~yix/keep/um/um8.2GL_HANDEDITS_8.2_foamblk N
> ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_foamout N
> ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_noTevlim N
> ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_pwr7_env_vars Y
> ~yix/keep/um/um8.2/GL_HANDEDITS_8.2_IOSRV_QG Y
10. In window <subindep_Compile>:
-> Model Selection
-> Compilation and Run Options
-> Compile and run options for Atmosphere and Reconfiguration
Variable: <ARECON>
Check box: Run the reconfiguration
Job baaj.b: Entry is set to 'ON'
Job baap.q: Entry is set to 'OFF'
Variable: <FILEEXEC>
Entry box: Filename for the Model executable
Job baaj.b: Entry is set to 'xbncc.exe'
Job baap.q: Entry is set to 'umefa.exe'
Variable: <FILEREC>
Entry box: Filename for the Reconfiguration executable
Job baaj.b: Entry is set to 'xbncc_qxreconf'
Job baap.q: Entry is set to 'umefa_qxreconf'
Variable: <PATHEXEC>
Entry box: Directory for the Model executable
Job baaj.b: Entry is set to '/short/dp9/jtl548/82/ROUTDIR/jtl548/xbncc/umatmos/bin'
Job baap.q: Entry is set to '/short/dp9/ycx548/data/um/bin/n512'
Variable: <PATHREC>
Entry box: Directory for the Reconfiguration executable
Job baaj.b: Entry is set to '/short/dp9/jtl548/82/ROUTDIR/jtl548/xbncc/umrecon/bin'
Job baap.q: Entry is set to '/short/dp9/ycx548/data/um/bin/n512'
11. snip: -not significant-
12. In window <atmos_Science_Physics>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> General Physics Constants
Variable: <CO2START>
Entry box: CO2 Mass Mixing Ratio for whole run (kg/kg)
Job baaj.b: Entry is set to '6.00200e-04'
Job baap.q: Entry is set to '5.94100e-04'
13. In window <atmos_Science_Section_Cloud>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Section by section choices
-> Section 9: Large Scale Cloud
Variable: <CLDAREAPRM>
Hidden variable: Method of cloud area parametrization
Job baaj.b: Variable is set to '1'
Job baap.q: Entry is inactive
Variable: <CLD_AREA>
Check box: Including cloud area parametrization (Gen2 Rad only)
Job baaj.b: Entry is set to 'ON'
Job baap.q: Entry is set to 'OFF'
14. In window <atmos_Science_Section_Aero_Dust>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Section by section choices
-> Section 17: Aerosols
-> Mineral Dust
Variable: <ACON(112)>
Radio button: Ancillary file to be
Job baaj.b: Entry is set to 'Configured'
Job baap.q: Entry is set to 'Not Used'
Variable: <AFILE(27)>
Entry box: and file name
Job baaj.b: Entry is set to '{$UM_ANCIL_SOILDUST_FILE}'
Job baap.q: Entry is inactive
UMUI
Variable: <APATH(27)>
Entry box: Enter directory or Environment Variable
Job baaj.b: Entry is set to '{$UM_ANCIL_SOILDUST_DIR}'
Job baap.q: Entry is inactive
Variable: <DUSTVEG>
Radio button: Emit dust from bare soil components of vegetated gridboxes:
Job baaj.b: Entry is set to 'Emit dust from seasonally bare soil, using LAI'
Job baap.q: Entry is set to 'Emit dust only from the bare soil tile'
15. In window <atmos_Science_Section_Dassim>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Section by section choices
-> Section 18: Data assimilation and temporal filtering
Variable: <ATMOS_SR(18)>
Radio button: Choose the relevant section release
Job baaj.b: Entry is set to 'No data assimilation or temporal filtering'
Job baap.q: Entry is set to '<2A> Data assimilation or temporal filtering included'
16. In window <atmos_Science_Section_LW_Meth>:
-> Model SelectionUMUI
-> Atmosphere
-> Scientific Parameters and Sections
-> Spec of trace gases
-> Gen 2-stream LW rad absorption by CH4 (Methane)
Variable: <LW2METHMIX>
Entry box: Specify mass mixing ratio of Methane
Job baaj.b: Entry is set to '1.006e-06'
Job baap.q: Entry is set to '9.994e-07'
17. In window <atmos_Science_Section_LW_N2O>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Spec of trace gases
-> Gen 2-stream LW rad absorption by N2O
Variable: <LW2NOXMIX>
Entry box: Specify mass mixing ratio of Nitrous Oxide
Job baaj.b: Entry is set to '4.945e-07'
Job baap.q: Entry is set to '4.925e-07'
18. In window <atmos_Science_Section_LW_CFC11>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Spec of trace gases
-> Gen 2-stream LW rad absorption by CFC11
Variable: <LW2CFC11MIX>
Entry box: Specify mass mixing ratio of CFC11
Job baaj.b: Entry is set to '1.110e-09'
Job baap.q: Entry is set to '1.129e-09'
19. In window <atmos_Science_Section_LW_CFC12>:
-> Model Selection
-> Atmosphere
-> Scientific Parameters and Sections
-> Spec of trace gases
-> Gen 2-stream LW rad absorption by CFC12
Variable: <LW2CFC12MIX>
Entry box: Specify mass mixing ratio of CFC12
Job baaj.b: Entry is set to '2.187e-09'
Job baap.q: Entry is set to '2.225e-09'
20. In window <atmos_InFiles_Start>:
-> Model Selection
-> Atmosphere
-> Ancillary and input data files
-> Start dump
snip: -- start dump specification --
21. In window <atmos_InFiles_Versions>:
-> Model Selection
-> Atmosphere
-> Ancillary and input data files
-> In file related options
-> Ancillary version files
Variable: <LUSRANCVN>
Check box: User to specify ancillary version files
Job baaj.b: Entry is set to 'ON'
Job baap.q: Entry is set to 'OFF'
Variable: <USRANC_FLNM>
Entry box: Specify the Ancil versions file
Job baaj.b: Entry is set to '/projects/access/umdir/ancil/n512/ancil_versions/ancil_versions_n512_ps30_01.txt_000'
Job baap.q: Entry is inactive
Variable: <USRANC_VN>
Entry box: Specify the Ancil filenames version
Job baaj.b: Entry is set to '/projects/access/umdir/ancil/n512/ancil_versions/ancil_fnames_n512_v2.txt_001'
Job baap.q: Entry is inactive
22. In window <atmos_InFiles_PAncil_Soilm>:
-> Model Selection
-> Atmosphere
-> Ancillary and input data files
-> Climatologies & potential climatologies
-> Soil moisture and snow depth
Variable: <ACON(36)>
Radio button: Ancillary field to be:
Job baaj.b: Entry is set to 'Not used'
Job baap.q: Entry is set to 'Updated'
Variable: <AFILE(2)>
Entry box: and file name
Job baaj.b: Entry is inactive
Job baap.q: Entry is set to 'an_smc'
Variable: <APATH(2)>
Entry box: Directory name or Environment Variable
Job baaj.b: Entry is inactive
Job baap.q: Entry is set to '{$STAGING_DIR}'
23. snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --
24. In window <atmos_InFiles_PAncil_AeroClim>:
-> Model Selection
-> Atmosphere
-> Ancillary and input data files
-> Climatologies & potential climatologies
-> Aerosol Clim Ancils
snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --
25. snip: -- ANCIL DIFF (xbjin do not run reconfig, so do not use ancils --
26. snip: -STASH DIFF-
27. In window <atmos_STASH_UserDiags>:
-> Model Selection
-> Atmosphere
-> STASH
-> User-STASHmaster files. Diags, Progs & Ancills.
Variable: <USERLST_A>
Differences in Table Specify the STASHmaster files
1c1,2
< ~access/da/nwp_input/um/UMUI_IN/GL_USTASH_8.2_UVFLUX_4581
---
> /g/sc/ophome/ashare/APS1/g/um/vn7.5/ctldata/ext/GL_USTASH_7.5_obukhov
> /g/sc/ophome/ashare/APS1/g/um/vn7.5/ctldata/ext/GL_USTASH_7.5_density
28. snip: -STASH DIFF-
------------------------------------------------------------------------------------------
A total of 28 window-entries differences reported
------------------------------------------------------------------------------------------