6.VIRTUAL IMPLEMENTATION - A-Division-2023-24-Odd/Repo-13 GitHub Wiki
The supporting pole for the pulley is done by - Nandish--
The pulleys for storage are done by - Ganesh Aroli.--
The Twister is done by - Ganesh Aroli--
The pulley is done by -Harsh--
The base for the machine is done by-Nandish --
The support for the base is done by -Sanjana--
The clamps for the base support are done by -Sanjana--
The Storage pole is done by -Monica--
The Nuts and bolts are done by -Monica--
Step 1: Start
Step 2: connect DC motor to Bread board.
Step 3: To Bread Board connect resistor
Step 4: Bread Board to Arduino.
Step 5:Arduino to laptop
Step 6: stop
Step 1: Start
Step 2: connecting Digital Display to bread Board
Step 3: Bread Board to
Step 4:Arduino to laptop connection
Step 5: Stop
Step 1: Start
Step 2: connecting digital display to bluetooth
Step 3: stop
Step 1: Start
Step 2: Connect circuit LCD Bread Board
Step 3:. Bread Board to Arduing.
Step 4: Andurno to Laptop
Step 5: Stop
Step 1: Start
Step 2: connect DC motor
Step 3: make connection to bread board
Step 4: connect circuit lcd
Step 5: connect to bread board
Step 6: bread board connection to Arduino
Step 7: Arduino to bread board
Step 8: stop
<style> </style>BATTERY SIZEING
COMPONENTS | QUANTITY | OPERATING VOLTAGE | OPERATING CURRENT OF EACH COMPONENT | TOTAL CURRENT | |
---|---|---|---|---|---|
2 | DC MOTOR | 1 | 5v | ||
3 | ARDUINO MEGA 2560 | 1 | 5v | 100mA | 100mA |
4 | DIGITAL DISPLAY | 1 | 5v | 43mA | 43mA |
5 | Bluetooth module | 1 | 3.3v | 50mA | 50mA |
6 | LCD | 3 | 3.5v | 30mA | 90mA |
- Total Current Consumption =
- Factor Of Safety =
- Total Current Consumption with Factor Of Safety =