Assigning an IP

1. Check what the network is called (ens160, ens192, etc)

2. Open /etc/netplan/00-installer-config.yaml

3. Set up file as follows. Make Changes to IP addresses as necessary

This file describes the network interfaces available on your system

For more information, see netplan(5).

network: version: 2 ethernets: ens160: dhcp4: no addresses: [192.168.1.222/24] gateway4: 192.168.1.1 nameservers: addresses: [8.8.8.8,8.8.4.4]