Mode warping - 5axes/UniversalCuraSettings GitHub Wiki

Warping settings, change the parameters to get a better bed adhesion and avoid nozzle collision due to part warping ( like Z hop )

• adhesion_type => brim

From Cura 5.0 :

• material_alternate_walls => True

Avoid combing

• retraction_combing => off
• retraction_combing_max_distance => 33 mm

Z hop

• retraction_hop_enabled => True

• retraction_hop => layer_height

• speed_travel => 100 mm/s

Reduce the Build plate temperature by 20%

• material_bed_temperature => actual material_bed_temperature*0.8
• material_bed_temperature_layer_0 => actual material_bed_temperature*0.8