Mode support - 5axes/UniversalCuraSettings GitHub Wiki

Settings in the support mode

Easy support remove

• minimum_support_area = 8 mm²
• support_bottom_density = 8 %
• support_bottom_distance = layer_height
• support_bottom_enable = False
• support_bottom_enable = True
• support_bottom_height = layer_height*4
• support_brim_enable = True
• support_brim_width = 3 mm
• support_enable = True
• support_infill_rate = 7 %
• support_interface_density = 30 %
• support_interface_enable = True
• support_interface_line_width = line_width*1.3
• support_interface_pattern = 'zigzag'
• support_interface_skip_height = layer_height
• support_join_distance = 3 mm
• support_material_flow = 70 %
• support_offset = layer_height * 3
• support_pattern = 'lines' # or zigzag
• support_roof_density = 90 %
• support_roof_enable = True
• support_roof_height = layer_height * 6
• support_roof_offset = layer_height * 3
• support_structure = 'normal'
• support_top_distance = layer_height
• support_type = 'buildplate'
• support_wall_count = 0
• support_xy_distance = line_width *2
• support_xy_overrides_z = 'z_overrides_xy' # or xy_overrides_z
• support_z_distance = layer_height