Mode standard - 5axes/UniversalCuraSettings GitHub Wiki

Standard settings

General settings

• Line_Width = machine_nozzle_size

• layer_height = 0.5 * machine_nozzle_size

• layer_height_0 = layer_height + 0.04

• material_print_temperature = 200°C

• magic_spiralize = False

• adaptive_layer_height_threshold = 250

• adaptive_layer_height_variation = 0.03

• adhesion_type = 'skirt'

• retraction_combing = 'infill'

• speed_slowdown_layers = 1

• support_enable = False

• support_type = 'buildplate'

• travel_retract_before_outer_wall = True

• skin_no_small_gaps_heuristic = False

• acceleration_enabled = True

• acceleration_infill = 1000 mm/s²

• acceleration_ironing = 1000 mm/s²

• acceleration_print_layer_0 = 500 mm/s²

• acceleration_roofing = 500 mm/s²

• acceleration_skirt_brim = 500 mm/s²

• acceleration_support_infill = 1000 mm/s²

• acceleration_topbottom = 1000 mm/s²

• acceleration_travel = 1500 mm/s²

• acceleration_wall_0 = 500 mm/s²

• acceleration_wall_x = 750 mm/s²

• bottom_layers = 6

• bottom_skin_preshrink = 1.2

• brim_line_count = 10

• conical_overhang_angle = 70°

• coasting_enable = True

• coasting_speed = 100 mm/s

• coasting_volume = 0.02 mm3

• cool_fan_full_at_height = 1

• cool_fan_full_layer = 5

• cool_fan_speed = 100 %

• cool_min_layer_time = 5 s

• cool_min_speed = 15 mm/s

• gradual_support_infill_steps = 0

• infill_before_walls = False

• infill_enable_travel_optimization = True

• infill_line_width = 0.5 mm

• infill_pattern = 'zigzag'

• infill_sparse_density = 8 %

• infill_wall_line_count = 1

• infill_wipe_dist = 0.2 mm

• ironing_enabled = False

• ironing_flow = 8.0 %

• ironing_inset = 0.15 mm

• ironing_line_spacing = 0.15 mm

• jerk_enabled = True

• jerk_infill = 15 mm/s

• jerk_ironing = 17.5 mm/s

• jerk_layer_0 = 7.5 mm/s

• jerk_print_layer_0 = 10 mm/s

• jerk_support = 15 mm/s

• jerk_roofing = 15 mm/s

• jerk_skirt_brim = 10 mm/s

• jerk_support_infill = 15 mm/s

• jerk_topbottom = 15 mm/s

• jerk_travel = 20 mm/s

• jerk_wall_0 = 7.5 mm/s

• jerk_wall_x = 15 mm/s

• limit_support_retractions = False

• magic_fuzzy_skin_point_density = 1.75

• magic_fuzzy_skin_thickness = 0.2 mm

• material_flow = 100 %

• max_skin_angle_for_expansion = 64°

• meshfix_maximum_deviation = 0.04 mm

• meshfix_maximum_resolution = 0.4 mm

• min_infill_area = 10 mm²

• min_skin_width_for_expansion = 0.1 mm

• optimize_wall_printing_order = True

• retraction_combing = 'off'

• retraction_combing_max_distance = 33 mm

• retraction_hop => 0.16 mm

• retraction_hop_enabled = True

• retraction_retract_speed = 50 mm/s

• roofing_layer_count = 1

• roofing_line_width = 0.35 mm

• skin_outline_count = 2

• skirt_gap = 8 mm

• skirt_line_count = 2

• small_feature_max_length = 5 mm

• small_feature_speed_factor = 100 %

• small_feature_speed_factor_0 = 50 %

• small_hole_max_size = 3.25 mm

• speed_infill = 60 mm/s

• speed_ironing = 55 mm/s

• speed_layer_0 = 20 mm/s

• speed_roofing = 40 mm/s

• speed_topbottom = 60 mm/s

• speed_travel = 150 mm/s

• speed_wall_0 = 25 mm/s

• speed_wall_x = 40 mm/s

• support_enable = False

• support_structure = 'normal'

• support_type = 'buildplate'

• support_angle = 67°

• support_bottom_density = 97%

• support_bottom_distance = 0.2 mm

• support_bottom_enable = True

• support_bottom_height = 0.8 mm

• support_brim_enable = True

• support_brim_width = 3 mm

• support_infill_rate = 7%

• support_join_distance = 3 mm

• support_offset = 0.6 mm

• support_interface_enable = True

• support_interface_line_width = 0.55 mm

• support_interface_offset = 0.6 mm

• support_interface_pattern = 'zigzag'

• support_interface_skip_height = 0.2 mm

• support_roof_density = 97 %

• support_roof_enable = True

• support_roof_height = 1.2 mm

• support_roof_offset = 0.6 mm

• support_top_distance = 0.2 mm

• support_tower_diameter = 6 mm

• support_tower_roof_angle = 60°

• support_use_towers = False

• support_wall_count = 1

• support_xy_distance = 0.4 mm

• support_z_distance = 0.2 mm

• support_xy_overrides_z = 'xy_overrides_z'

• support_tree_angle = 45°

• support_tree_branch_diameter_angle = 2.5°

• support_tree_branch_distance = 0.5 mm

• support_tree_collision_resolution = 0.15

• top_layers = 7

• top_thickness = 1 mm

• travel_avoid_distance = 1 mm

• travel_avoid_other_parts = False

• travel_avoid_supports = True

• travel_compensate_overlapping_walls_0_enabled = False

• travel_retract_before_outer_wall = True

• wall_0_inset = 0.02 mm

• wall_line_count = 3

• wall_min_flow = 15%

• wall_min_flow_retract = True

• xy_offset_layer_0 = -0.025 mm

• z_seam_relative = True

• z_seam_type = 'back'

if top_bottom_pattern != 'concentric':

• skin_overlap = 10 else:

• skin_overlap = 15

• skin_line_width = line_width

• infill_material_flow = material_flow%

• meshfix_maximum_travel_resolution = min(meshfix_maximum_resolution * speed_travel / speed_print, 2 * line_width)

• support_brim_line_count = support_brim_width / (skirt_brim_line_width * initial_layer_line_width_factor / 100.0 )

• support_roof_pattern = support_interface_pattern

• support_xy_distance_overhang = (machine_nozzle_size / 2)

• brim_line_count = 10

Standard settings

• meshfix_union_all_remove_holes = False

• retraction_enable = True

• roofing_layer_count = 1

• skin_outline_count = 0

• support_roof_pattern=support_interface_pattern

• support_xy_distance_overhang=(machine_nozzle_size / 2)

• support_roof_density = 97%

• retraction_hop_enabled = False

• support_use_towers=False

• support_tower_diameter = 6 mm

• support_tower_roof_angle = 60°

• meshfix_maximum_deviation = 0.02 mm

• meshfix_maximum_resolution = 0.2 mm

• support_tree_angle=45°

• support_tree_branch_diameter_angle = 2.5°

• support_tree_branch_distance = 0.5 mm

• support_tree_collision_resolution = 0.15 mm

• roofing_line_width = 0.9 * line_width

• infill_sparse_density = 10 %

• max_skin_angle_for_expansion = 90°

• min_infill_area=10

• min_skin_width_for_expansion = 0.1 mm

• coasting_enable = False

• coasting_speed = 100 mm/s

• coasting_volume = 0.02 mm3

Cura 4.X

• fill_perimeter_gaps = 'nowhere'