Mode save material - 5axes/UniversalCuraSettings GitHub Wiki

Settings modified by the Save material option

Use the minimum material for your print

• gradual_support_infill_steps=1

• gradual_support_infill_step_height=1.5

• top_layers=4

• bottom_layers=4

• wall_line_count=2

• infill_material_flow=80 %

• support_material_flow=70 %

• infill_wall_line_count=0

• infill_sparse_density=5 %

• infill_pattern='lines'

If Version of Cura equal 4.X

• fill_perimeter_gaps='nowhere'