Proptotype settings. List of parameters specific to this type of setting. Intent to obtain a fast and rought result.

Fast and rought

• layer_height = 0.6 * machine_nozzle_size

• infill_sparse_density = 10 %

• wall_line_count=2

if the version de Cura is equal to 4.X

• fill_perimeter_gaps='nowhere'

• max_skin_angle_for_expansion=64°

Top Surface Skin Layers

• roofing_layer_count=0
• skin_preshrink=

Speed

Acceleration

• acceleration_enabled=True
• acceleration_infill=1000
• acceleration_ironing=1000
• acceleration_print_layer_0=500
• acceleration_roofing=500
• acceleration_skirt_brim=500
• acceleration_support_infill=1000
• acceleration_topbottom=1000
• acceleration_travel=1500
• acceleration_wall_0=500
• acceleration_wall_x=750

Jerk

• jerk_enabled=True
• jerk_infill=15
• jerk_ironing=17.5
• jerk_layer_0=7.5
• jerk_print_layer_0=10
• jerk_support=15
• jerk_roofing=15
• jerk_skirt_brim=10
• jerk_support_infill=15
• jerk_topbottom=15
• jerk_travel=20
• jerk_wall_0=7.5
• jerk_wall_x=15

rought

• meshfix_maximum_deviation=0.04

• meshfix_maximum_resolution=0.4

• min_infill_area=0

• min_skin_width_for_expansion=0

• skirt_gap=2

• skirt_line_count=1

if layer_height < (machine_nozzle_size*0.333):

• infill_sparse_thickness=layer_height*2)

else:

• infill_sparse_thickness=layer_height