Mode figurine - 5axes/UniversalCuraSettings GitHub Wiki

Figurine settings for fine details and good cooling

• layer_height = 0.3 * machine_nozzle_size

• infill_sparse_density => 8 %

• fill_perimeter_gaps => 'nowhere'

• skin_outline_count => 2

• brim_line_count => 2

• wall_line_count => 3

speed

• speed_travel => 100 mm/s
• speed_layer_0 => 18 mm/s

support tree enable

• support_enable => True

• support_tree_enable => True

• support_structure => 'tree'

• support_tree_angle => 45°

• support_tree_branch_diameter => (line_width*8)

if self.Major >= 5 and self.Minor >= 4 :

• support_tree_max_diameter => (line_width*16)
• support_tree_bp_diameter => (line_width*16)
• support_tree_tip_diameter => (line_width*6)
• support_tree_rest_preference => 'buildplate'

else:

• support_tree_collision_resolution => 0.15

• support_tree_branch_distance => 0.5

• support_tree_branch_diameter_angle => 5°

• support_tree_branch_distance => 0.5 mm

• support_tree_collision_resolution => 0.15 mm

• support_interface_offset => (line_width*0.5)

if Cura release < 5 :

• fill_perimeter_gaps => 'nowhere'

• z_seam_corner => 'z_seam_corner_weighted'

Z Hop When Retracted

• retraction_hop_enabled => True

• retraction_hop => layer_height

Print Thin Walls

• fill_outline_gaps => True